User's Manual

Table Of Contents

USER MANUAL

XORAYASUITE

The following check boxes affect the IDs of the specified CAN messages in

this category:

▪ Extended frame Use 29-bit ID instead of 11-bit ID

▪ Can FD Activate CAN FD mode

▪ Bit Rate Switch Transfer payload with CAN FD baudrate

(Requirement: Can FD selected)

Configure triggers:

 Select the check box Enable Trigger from following CAN message.

 Under Id, specify the ID of the CAN message that raises a trigger.

(➔ Changing the numbering system)

 Select the check boxes Extended Frame, Can FD and Bit Rate Switch as

desired.

 Specify the Number of bytes for the trigger (1).

 Select one of the 8-byte blocks of the trigger (2) for editing.

 Specify the bytes of this payload block. (➔ Set bits)

 Specify further 8-byte blocks of this trigger.

 Repeat as necessary for up to a total of five triggers.

The following CAN messages are preconfigured as triggers:

Byte 1

Byte 2 (X = "don't care")

1d6

7b7