User's Manual
Table Of Contents
- 1 Introduction
- 2 Safety and warranty
- 3 Product description
- 4 Commissioning
- 5 XorayaSuite
- 6 Maintenance
- 7 Storage, transport and disposal
- 8 Appendix
USER MANUAL
XORAYASUITE
72
BroadR-Reach/Base-T1 switch:
1
Reset link
The Link state of each port is represented as a red or green traffic light.
Click (1) to reset the link.
In Data Sink switch operation mode, the data are only recorded.
In Pass Through mode, the BroadR-Reach ports are combined as pairs to
allow a bus connection between ECU and BroadR-Reach component, for
example a camera. Configure the paired ports of the BroadR-Reach switch
alternately to master and slave so that the data are routed in both
directions. The data are also recorded.