User's Manual

USER MANUAL
XORAYASUITE
77
Setting
Description
Default
Enable
Turn on logging for this channel
Off
Alias
Freely selectable channel name
gnlog# or
DLT#
Bus ID
Additional ID for subsequent evaluation
Source
TCP (GNLog, DLT) or UDP (only DLT)
IP address and port of the ECU
Default sets the port to 851 (GNLog) or 3490
(DLT)
Use Busspec
Load configuration template provided by the
vehicle manufacturer
Off
Prevent Sleep
Mode
ML-N4000 will not go into sleep mode as long
as there is activity on this channel
On
Debug level
Detail level of the debug information
GNLog: 0 to 3 (max)
DLT: 0 (None) to 6 (Verbose)
GNLog: 2
DLT: 0 (None)
Trace state*
Send trace messages
Off
Verbose mode*
Off: Send only dynamic data
On: Send dynamic and static data
Off
VLan Id
Check box activates VLAN ID according to IEEE
802.1Q
Values: 1 to 4095
1
IP address
IP address which the ML-N4000 uses in the
communication with the ECU
0.0.0.0
IP mask
Network mask which the ML-N4000 uses in the
communication with the ECU
0.0.0.0
* Only for DLT