User's Manual

USER MANUAL
XORAYASUITE
82
PROTOCOL_CCP
PROTOCOL_CCP_SPY
The available modes (Master, Spy) depend on the
activation of these licences.
Check in category Versions of system settings to verify
which licences are activated for your ML-N4000.
(➔ Versions)
Setting
Description
Default
Enable
Turn on logging for this channel
Off
Spy CCP
traffic
CCP mode
On: Spy (external communication is monitored,
no sending)
Off: Master
Off
Alias
Freely selectable channel name
ccp#
Bus ID
Additional ID for subsequent evaluation
Prevent Sleep
Mode
ML-N4000 will not go into sleep mode as long as
there is activity on this channel
Off
Source
Physical CAN channel to be used
Can_1 (can1)
A2L file
Description file, which is suitable for the ECU and
is loaded to configure the CCP connection
Selection file
Signal filter file (XML, CFG or LAB), which contains
a (pre-)selection of the signals to be monitored
Retry max
Maximum number of retries after unsuccessful
connection attempt
3
Data timeout
No data received for this period of time (in s)
leads to an error
10
Meaning of the symbols for the physical CAN channels:
transmission-capable
transmission-capable, but currently set to passive
not transmission-capable
not enabled
Via Edit CAN interface channel (2) button, you can enable it, activate its
transmission capability or change its baudrate if necessary.