User's Manual
Table Of Contents
- 1 Introduction
- 2 Safety and warranty
- 3 Product description
- 4 Commissioning
- 5 XorayaSuite
- 6 Maintenance
- 7 Storage, transport and disposal
- 8 Appendix
USER MANUAL
XORAYASUITE
84
DiagCCP > Filter:
1
Show all signals
7
Export signals
2
Search box
8
Display CCP main settings
3
Refresh signal list
9
Add polling channel*
4
Display selected signals
10
Status of the signal definition file
5
Clear selected signals
11
Prescaler*
6
Import signals
* Only if supported by the A2L file
Select signals for the DAQ measurement mode:
Select the check box of the signal (row) for the event channel (column).
or
Highlight one or multiple rows and right-click to activate these signals
simultaneously for one event channel.
Select signals for the polling measurement mode:
Click Add polling channel (9).
The button is inactive if the A2L file does not support polling.
In the row of the signal, select the polling cycle from the drop-down
list.
Filter signal list:
Enter the term or partial term in the search box (2) and click Refresh
signal list (3).
or
Click Display selected signals (4) to only display signals with selected
check boxes or selected polling cycle.
Clear signal list filter:
Click Show all signals (1).