User's Manual

USER MANUAL
SAFETY AND WARRANTY
9
2 Safety and warranty
The XORAYA ML-N4000 dataloggers were developed according to the latest
state of the art and offer outstanding safety levels. During operation,
however, this safety level can only be achieved if the user complies with all
relevant safety regulations.
Upon measuring, safety regulations of the professional associations must be
observed.
Please contact an expert or the service of X2E GmbH when in doubt about
the operation, safety, or connection of the ML-N4000.
2.1 Intended use
The ML-N4000 is used for real-time acquisition of data communication in
automotive bus systems. You can perform, store and transfer measurements
to a PC, where you can read and analyse them using the GUI of the
XORAYASuite.
▪ The ML-N4000 is intended for use only by trained personnel.
▪ The ML-N4000 must not be used in residential or living areas. Its use is
strictly limited to industrial environments.
▪ The ML-N4000 must not be used in hazardous areas.
▪ Always operate the ML-N4000 within its technical specifications.
(➔ Technical data)
▪ The ML-N4000 may only be used under the conditions and for the
purposes for which it was designed.
▪ Repairs may only be carried out by trained personnel of X2E GmbH.
▪ Operational safety cannot be guaranteed after modifications or
conversions.
▪ Except for data buses, never perform measurements on live parts.
▪ The 4-mm plug of the power supply cable delivered must never be
introduced in low-voltage sockets.
▪ The data lines may be extended up to a maximum of 30 m (USB: 3 m,
eSATA: 1 m) provided that they are shielded like the supplied cables.
▪ The voltage supply may be extended up to a maximum of 3 m with
sufficient cross-section.