User's Manual

USER MANUAL
XORAYASUITE
90
PROTOCOL_XCP_MASTER
PROTOCOL_XCP_SPY
PROTOCOL_XCP_ON_CAN
PROTOCOL_XCP_ON_FLEXRAY
The available modes (Master, Spy) and physical buses
(CAN, FlexRay) depend on the activation of these
licences.
Check in category Versions of system settings to verify
which licences are activated for your ML-N4000.
(➔ Versions)
Setting
Description
Default
Enable
Turn on logging for this channel
Off
Spy XCP
traffic
XCP mode
On: Spy (external communication is monitored,
no sending)
Off: Master
Off
Alias
Freely selectable channel name
xcp#
Bus ID
Additional ID for subsequent evaluation
Prevent Sleep
Mode
ML-N4000 will not go into sleep mode as long as
there is activity on this channel
Off
Source
Physical CAN or FlexRay channel to be used
Can_1 (can1)
A2L file
Description file, which is suitable for the ECU and
is loaded to configure the XCP connection
Transport
layer
Selection if the A2L contains multiple transport
layer descriptions
Selection file
Signal filter file (XML, CFG or LAB), which contains
a (pre-)selection of the signals to be monitored
Retry max
Maximum number of retries after unsuccessful
connection attempt
3
Data timeout
No data received for this period of time (in s)
leads to an error
10