User's Manual

USER MANUAL
XORAYASUITE
91
Meaning of the symbols for the available CAN or FlexRay channels:
transmission-capable
transmission-capable, but currently set to passive
not transmission-capable (only for CAN)
not enabled
Via Edit interface channel (2) button, you can enable it, activate its
transmission capability or change its baudrate if necessary.
A2L configuration:
 Click Open A2L file (3) and select the description file that corresponds
with the ECU.
 The XORAYASuite reads the A2L file and configures the XCP
connection accordingly.
 If Overwrite alias with ECU name under Settings (6) is activated,
Alias is also changed.
 If the A2L contains multiple transport layer descriptions, select the
layer from the appearing window.
You can change this selection afterwards via the drop-down list
Transport layer.
 If the time value T7 is equal to 0, increase this value in the appearing
window to avoid protocol errors with the ECU.
You can change this value and all the other time values in the category
Advanced. (➔ Advanced)
 If supported by the A2L file, the XORAYASuite automatically runs an
EPK version check with the ECU and displays the result via the
Traffic light for the EPK check (4).
You can also execute this check manually via the EPK button.
Levels of the Traffic light for the EPK check (4):
▪ green check successful
▪ yellow check not possible
▪ red check not successful