User's Manual
Table Of Contents
- 1 Introduction
- 2 Safety and warranty
- 3 Product description
- 4 Commissioning
- 5 XorayaSuite
- 6 Maintenance
- 7 Storage, transport and disposal
- 8 Appendix
USER MANUAL
XORAYASUITE
92
Signal configuration:
Click Open selection file (5) and select a suitable XML, CFG or LAB file.
or
Click Signal selection and select the signals manually. (➔ Filter)
The XORAYASuite calculates the expected percentage of the bus load
increase.
The result evaluation is displayed via the Traffic light for the bus
load (7).
If angle-synchronous (RPM-dependent) event channels are used, select
the Engine RPM (8), which influences the bus load calculation.
Configure the levels of the Traffic light for the bus load (7):
Right-click on the traffic light and then on Edit traffic light settings for
this interface type.
Specify the percentage limit between green and yellow (standard: 50).
Specify the percentage limit between yellow and red (standard: 80).
Click OK.