User's Manual

USER MANUAL
XORAYASUITE
66
CAN > Routing:
Here, you configure the routing of messages received on other CAN
channels via the currently selected channel. The payload is not changed
while the IDs of source and target message can differ.
1
Add routing
3
Save routing
2
Delete routing
Configure routing:
 Select the check box Enable.
 Click Add routing (1).
 Under Source interface, choose the receiving CAN channel.
 Under Source msg ID, specify the ID of the source message.
( Changing the numbering system)
Select the check box Ext. ID for a 29-bit ID instead of a 11-bit ID.
 Optional: Under Target msg ID, specify content and length of the
target message ID.
If you do not specify a target message ID, the source message ID is
applied.
 Click Save routing (3).
 Repeat as necessary for further routings via this channel.
Meaning of the symbols for the available CAN channels:
enabled
not enabled