Instructions

18
» Search on your smartphone/tablet for available bluetooth devices.
» Select „X4 Casey Music“ from the list of available devices on your smart-
phone/tablet.
HINT: The device and smartphone/tablet were successfully conntec-
ted when a sound is played, along the LED glowing permanently. Choose
the desired music on your smartphone/tablet.
While the music is playing, the LED (Figure 1) on the frontside will blink
slowly. When pausing the music it will glow permanently.
- Track selection
During playback you can skip with (Figure 3 № 6) or (Figure 3 № 2)
to the next or previous track.
In pause mode you can skip with or tot he next or previous track.
The track will start playing immediatley.
- Microphones
The device is equipped with two coeual microphones (Figure 4). Plug them
into the inputs on the left side of the device to use them. Open the device by
opening it with the clip lock on the upper side, to take out the microphones.
There is no difference in quality between the two inputs, even if only a
single microphone is used.
HINT: The volume oft he microphones cannot be adjusted seperatley.
Take care that you don’t place the microphone too close to the speaker –
otherwise an acoustic feedback (squealing from the speakers) can happen.
Higher settings of the microphone volume will result in greater sensitivity
for acoustic feedbacks.
- Public announcements
In order to use the microphones, it is not necessary to play any music.
» Turn on the device as described at „ON/OFF“. Plug in the desired amount
of microphones. Flip the switch on the microphone(s) to „ON“ (Figure 4).
» Now you can start speaking or singing.