User's Manual

■ POS spec
Input: 5V DC, 2A
■ Power Adapter spec:
Input: 100~240 Vac
Output: 5V DC, 2A
This symbol is intended to alert the user before starting using the POS.
( Caution: Use only the AC adapter approved and provided by XAC Automation
Corporation for use with this device. Use of any other AC adapter may cause a risk of fire
or explosion)
 Operating Temperature: 0
o
C to 40
o
C
2. P OWER O N /O FF THE D EVICE
To power on the device, long press the Power key (Figure 2) for 5 seconds until a buzzer sound
is heard, and screen is activated.
To power off the device, press the Power key for 2 seconds to select Power Off on the menu to
shut down the device.
Figure 2
NOTE: xCL_E200NP will enter sleep mode automatically if unused for 1 minute.
3. U SING THE M AGNETIC C ARD R EADER
The magnetic card reader slot is on the right side of the device (Figure 3). Swipe the card
through the slot with magnetic stripe side facing the same direction as the display.