User's Manual

RESET CONFIGURATION (SLIDE 10)
To reset the iG3 Gateway back to the factory default settings:
a) Log into the iG3 using XanAssist
b) Click on the SYSTEM tab
c) Click on the RESET CONFIGURATION menu option on the left
F) CLICK on the RESET CONFIGURATION button
G) You must then re-power the gateway, by first turning it off, then on.
H) Upon re-powering, you will need to follow the 1
st
time setup instructions
mentioned above in Step 4.
DISPLAY LOG (SLIDE 6)
To view the activity log of the iG3 Gateway:
I) Log into the iG3 using XanAssist
J) Click on the SYSTEM tab
K) Click on DISPLAY LOG menu option on the left
L) You can now review the log information
CHANGE PASSWORD (SLIDE 8)
All gateways initially have the same login and password (“admin”) and it is
recommended that you change your password after logging in for the first time.
M) Log into the XanAssist
N) Click on the SYSTEM tab
O) Click on the CHANGE PASSWORD menu option on the left
P) Verify your current password
Q) Enter your new password and click submit
R) Your password has now changed
CHANGE GATEWAY NAME (SLIDE 8)
If you wish to change the name of the Gateway (as it will appear on your web
account):
A) Log into the iG3 using XanAssist
B) Click on the SYSTEM tab
C) Click on CHANGE GATEWAY NAME menu item on the left
D) Type the new name into the Gateway Name field
E) Click on the CHANGE GATEWAY NAME button
SHOW VERSION (SLIDE 9)
To view the version of software you are using
A) Log into the iG3 using XanAssist
B) Click on the SYSTEM tab
C) Click on the SHOW VERSION menu item on the left