User's Manual

Adjust the camera antenna
Select other operating channels on other 2.4 GHz devices
Motion events Ensure the camera is not positioned behind glass.
Are not triggered The notion sensor is triggered by changes in heat.
Any material such as glass that “insulates” keeps the camera form
Detecting heat changes (movement)
Ensure the camera head is positioned properly.
Audio problems Make sure your volume is turned up when playing back the video
clip. Make sure the sound is within the microphone range (6-10 feet)
Does the computer have a sound card and are the speakers
activated
And loud enough?
Features and Specification
 PIR motion detection
 LED in camera illuminates when activity occurs
 Microphone captures audio
 80 degree field of view for motion and camera lens
 Weather resistant
 Auto Brightness, Auto Contrast, Auto White-Balance
 All hardware for wither wall of ceiling mounting included
 AC power supply
Image sensor: 1/4-inch color CCD
Lens: 3.6mm, F2.0 fixed lens
Resolution: 420 TV lines
Signal/noise ratio: 48dB
Min illumination: 0.05 lux
Power consumption: 1.5W
Motion and camera lens: 80 degree field of view
Frequency rang: 2.41-2.47 GHz
Current consumption: approximately 280mA
Typical range outdoors: 250 feet (76m)
Typical range indoors: 60 feet (18m)
NOTE:THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV
INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT.
SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO OPERATE THE
EQUIPMENT.