User Manual and Operating Guide

8-6 Printing with Various Media Types________________________
Printing Transparencies
Always use the multipurpose feeder, following the procedure in
chapter 2, the media specifications in chapter 7, and these guidelines
when printing transparencies.
• Avoid handling transparencies excessively to prevent fingerprints
and scratches.
• Keep the paper path clean (see chapter 9); dust or dirt can scratch
transparencies and reduce print quality.
• Load fewer transparencies if jams occur. The weight of a stack
of transparencies could cause the sheets to stick together.
• Remove each transparency as it is printed to help prevent static
buildup.
• Do not fan transparencies. This causes static buildup which can
cause jams.
• Use the Cool fuser temperature setting when printing
transparencies.
◊◊◊