® XT1 AM FM RDS / RBDS Tuner User Manual www.xantech.
/16 XT1
Thank you for purchasing the XT1 Tuner. We take great pride in the design and manufacturing quality products, and are confident that your new XT1 will provide you with many years of enjoyable and trouble-free service. Should you ever have any need to call upon our services, please feel free to contact us at the address shown at the end of this manual or contact the dealer or distributor from whom you purchased this product.
Each XT1 package contains - XT1 AM/FM Tuner with RDS/RBDS IR cable: 3.5mm mono socket - 3.5mm stereo jack Serial cable: DB9 female - RJ45 male Audio Cable: L/R RCA male to 3.5mm stereo female jack Audio Cable: L/R RCA male to L/R RCA male Power supply 12VDC 300mA FM Dipole Antenna AM loop antenna User Manual Optional (sold separately) 1U Rack mount kit for up to 3 tuners: Xantech part number 1U3XT1RM FM Antenna AM Antenna Serial cable to 3rd party device GND Power Supply 3.
Front Panel Controls 1 3 2 4 5 (1) MENU Pressing this button allows you access to the following functions: AM/FM band selection Auto/Manual tuning selection Scan the preset stations Memorize a station Set the IR Code. (2) ENTER (Power) When plugging in the power transformer the first time, the tuner will automatically turn on. Pressing this button for 4 seconds will turn the unit ON from standby (sleep mode), or put the unit into standby from its ON state.
Tuner Operation MAKE AM/FM BAND SELECTION 1. Press and release the MENU button until either the ENTER and MHz characters flash, or the ENTER and kHz characters flash. 2. Press the ENTER button until either MHz or kHz stops flashing. 3. Press either UP or DOWN button to obtain MHz or kHz. (note – MHz is the FM band and kHz is the AM band) 4. Either wait until the ENTER stops flashing or depress the ENTER button. EZ Steps: 1. Press MENU once 2. Press ENTER 3. Press UP 4.
TO PRESET MEMORIES 1. 2. 3. 4. 5. Select a desired station. Press and release MENU button until MEM and ENTER characters flash. Press ENTER button. Select desired PRESET number by pressing UP or DOWN button. Press ENTER button. EZ Steps: 1. Select desired station 2. Press MENU four times 3. Press UP or Down 4. Press ENTER button RDS/RBDS INFORMATION RDS/RBDS information is not shown on the XT1 display and is only available through its RS232 connection.
Xantech Limited Warranty Xantech Corporation ("Xantech") warrants to the holder of a valid proof of purchase as the first end-user purchaser ("You"), its products to be free from defects in materials and workmanship for the periods specified below from the date of purchase. This limited warranty extends only to You for product purchased and used in the United States of America.
Xantech products (go to xantech.
Appendix 1 RS232 Protocol Interface Baud Rate : Data Bits : Transmission: 9600 8 In ASCII codes Stop Bit: 1 Parity Bit: none Format <_><_>_<_><_><_> Is number 00 to 99, a "00" selects all zones. The maximum number is 99. Zone ID is factory set at "0", can be reassigned to other number below 99. For the XT1, the factory default setting for product ID is 10 Is number 00 to 99, a "00" selects all tuners.
5 Auto Memory 1 Start scan from the current frequency and write each station into preset sequentially 6 7 RS232 Output Preset Scan 2 Start scan from FM 87.5MHZ to 107.95 then AM 530 to 1690, write each station into preset sequentially. 1 Outputs feedback one by one (i.e. on demand) 2 Outputs feedback every 0.
15 Program XT1 Zone ID 888 Program XT1 Zone ID "number" 222 Return XT1 Zone ID 666 Program XT1 Tuner ID "number" 444 Return XT1 Tuner ID 00..99 00..99 Examples: 01_10_00_1_1 Instruct Zone 1 XT1 to power off 01_10_06_1_2 Instruct Zone 1 Tuner 6 XT1 to power on 01_10_00_1_3 Instruct zone 1 XT1 to power on if it is off, or power off if it is on 12_10_00_3_21 Zone 12 XT1 to tune into preset #21 03_10_00_4_107_50 Zone 3 XT1 to tune to FM 107.
Pin Layout CN12 5 9 4 8 3 7 2 6 1 RX 10 TX Circuit Item RJ45 DB9-Male DB9-Female Pin 1 3 2 Pin 2 2 3 RX Pin 4 5 5 GND TX 13/16 XT1
Appendix 2 Discrete IR HEX Codes The carrier frequency: 38KHz.
0 78 1 E8 2 48 3 68 4 02 5 12 6 20 7 40 8 A0 9 A2 0000 006D 0000 0021 0156 00AB 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0040 0015 0040 0015 0040 0015 0040 0015 0040 0015 0040 0015 0040 0015 0040 0015 0015 0015 0040 0015 0040 0015 0040 0015 0040 0015 0015 0015 0015 0015 0015 0015 0040 0015 0015 0015 0015 0015 0015 0015 0015 0015 0040 0015 0040 0015 0040 0015 0000 006D 0000 0021 0156 00AB 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 00
® Xantech Corporation 13100 Telfair Ave., Sylmar CA 91342 | Xantech.com Installation Instructions, XT1, XT1E © 2009 Xantech Corporation Document # 08905219B This document is copyright protected. No part of this manual may be copied or reproduced in any form without prior written consent from Xantech Corporation. Xantech Corporation shall not be liable for operational, technical, or editorial errors/omissions made in this document. Toll Free Number: 800.843.
