HDMI1X2 USER MANUAL www.xantech.
CONTENTS 1 Introduction / Operation Notes 2 Features and Package Contents 3 Panel Layout and Descriptions 4 Panel Descriptions, Continued 5 Connecting The Xantech 1X2 Splitter For HDMI 1.
INTRODUCTION The Xantech 1X2 Splitter for HDMI 1.3 The Xantech 1X2 Splitter for HDMI 1.3 allows set-top boxes, DVD players, Bluray players and other HDTV devices with HDMI outputs to be connected to up to two HDTV displays (or more if multiple splitters are utilized in place of HDTV displays). How It Works The Xantech 1X2 Splitter for HDMI 1.3 is a distribution hub that sends the same HDMI signals to two HDMI-compatible digital display devices.
FEATURES Features • Connects up to two HDMI / DVI displays from one HDMI source • Optionally add more displays by connecting splitters • Easily attains resolutions up to 1080p, 2k, and 1920 x 1200 • HDMI and HDCP compliant HDMI 1.
PANEL LAYOUT AND DESCRIPTIONS Front Panel 1 2 3 4 Back Panel 5 6 7 8 9 10 1 Power LED This LED will activate once a valid power source is applied. 2 Internal EDID LED This LED will activate only when the pre-programmed internal EDID is being used. Please see page 5 for more details on the internal EDID. 3 External EDID LED (default EDID routing) This LED will activate only when the external EDID is being used. Please see page 5 for more details on the external EDID.
PANEL DESCRIPTIONS, CONTINUED 7 HDMI Input This is the input for the HDMI source device. When a valid source is detected by the splitter, the Link LED will activate. 8 HDMI Out 1 This is the first HDMI output port. Connect a valid HDMI display to this port. When the External EDID mode is active, the EDID form the display connected to this port will be used to send to the source. 9 HDMI Out 2 This is the second HDMI output port. Connect a valid HDMI display to this port.
CONNECTING THE 1X2 SPLITTER FOR HDMI 1.3 How to Connect the 1X2 Splitter For HDMI 1.3 1. Connect the supplied cable from the HDMI source into the 1X2 Splitter for HDMI 1.3 input. 2. Connect the cables from your displays (monitor or projector) into the HDMI outs of the 1X2 Splitter for HDMI 1.3. Up to 2 displays are supported. 3. Plug the 5V DC power supply into the 1X2 Splitter for HDMI 1.3.
SPECIFICATIONS Video Amplifier Bandwidth: 225 MHz Input Video Signal: 12 Volts p-p Input DDC Signal: 5 Volts p-p (TTL) Single Link Range: 1080p/1920 x 1200, 12 bit color depth HDMI Connector: Type A 19 Pin Female Power Supply: 5V DC Power Consumption: 10 Watts (max) Dimensions: 10.25”W x 1”H x 4.25”D Shipping Weight: 5 lbs Technical Support Hours: 7AM-5:30PM PST Phone: 800.843.5465 press 2 for Tech Support FAX: 800.492.6832 e-mail: tech@xantech.
www.xantech.
