User manual

ManualsBrandsXantech Manualsaudio & home theatreStereo System XDT77

Thank you for choosing XANTECH. Read this manual carefully to get the best performance from this unit.

XDT77

OWNER’S MANUAL

AM/FM STEREO DUAL TUNER

Summary of content (13 pages)

PAGE 1
XDT77 AM/FM STEREO DUAL TUNER OWNER’S MANUAL Thank you for choosing XANTECH. Read this manual carefully to get the best performance from this unit.
PAGE 2
Important Safety Instructions Y CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
PAGE 3
Contents Remote Control Unit Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 The provided Remote Control Unit allows the unit to be operated from a distance. When operating the remote control unit, point it towards the REMOTE SENSOR on the front panel of the unit. Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Before Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 4
Connection CAUTION Turn off the power of all the equipment before making connections. Read instructions of each component you intend to use with this unit. < Be sure to insert each plug securely. To prevent hum and noise, do not bundle the connection cords with the power cord.
PAGE 5
A FM Antenna Connect an outdoor FM antenna to the FM 75Ω socket. Generally, a 3-element antenna will be sufficient; if you live in an area where the FM signals are particularly weak, it may be necessary to use one with 5 or more elements. If standard FM broadcast frequencies are available via your cable service, you may connect your 75 ohm FM antenna jack to your cable system. Please contact your cable service to discuss this option.
PAGE 6
Names of Each Control K A B C D K E F G H Buttons for TUNER 1 I J D E F G H Buttons for TUNER 2 C J F D G I H E J F D 6 G I H E I J
PAGE 7
A REMOTE SENSOR When operating the remote control unit, point it towards the REMOTE SENSOR. B STANDBY indicator This indicator lights when the unit is in the standby mode. When the unit is turned on, it goes off. C POWER switch Press this switch to turn the unit on or off. The equipment draws nominal non-operating power from the AC outlet with its POWER switch in the OFF position. D FM button, AM button Use these buttons to select FM or AM.
PAGE 8
Radio Reception B Manual Selection (Selecting stations which cannot be tuned automatically) 1 2 3 TUNER 1 4 2 3 4 TUNER 2 When the TUNING/PRESET button is pressed momentarily (0.5 second or less), the frequency changes by a fixed step. FM : 0.2 MHz steps AM : 10 kHz steps 1 Press the POWER switch to turn the unit on. Press the TUNING/PRESET button repeatedly until the station you want to listen to is found. C Direct Tuning Input the frequency numbers with the numeric buttons.
PAGE 9
Preset Tuning 1 5 4 2 5 1 3 5 TUNER 1 Manual Memory Presetting 5 1 4 2 5 3 5 TUNER 2 5 While the MEMORY indication is flashing select the preset you would like to use for this station by EITHER: You can store your favorite FM and AM stations into any of the 30 preset locations by: Scroll up or down using the TUNING/PRESET buttons until the preset is displayed. Then press the MEMORY button to store 1 Select the AM or FM band by pressing the corresponding band button.
PAGE 10
Preset Tuning 2 Troubleshooting If you experience any problems with the unit, please take a moment to look through this chart and see if you can solve the problem yourself before you call your dealer or service center. 1 2 TUNER 1 3 1 2 3 TUNER 2 How to select preset stations 1 Select the AM or the FM band by pressing the corresponding button. No power e Check the connection to the AC power supply.
PAGE 11
Specifications FM Tuner Section (Without notes 98.1 MHz, 65 dBf) Tuning Range. . . . . . . . . . . 87.5 MHz – 107.9 MHz (200 kHz steps) Usable Sensitivity (IHF). . . . . . . . . . . . . . . . . . . . . . . . Mono: 15 dBf 50 dB Quieting Sensitivity . . . . . . . Mono: 21 dBf , Stereo: 41 dBf Total Harmonic Distortion (1 kHz) . . . . Mono: 0.3%, Stereo: 0.4% Frequency Response . . . . . . . . . . . . . . . . . 30 Hz – 15 kHz, ±1.5 dB Stereo Separation (1 kHz) . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 12
Appendix A XDT77 DUAL AM/FM TUNER RS-232 COMMANDS PURPOSE: This document describes the RS-232 commands that will operate the XANTECH XDT77 Dual Tuner through the 9-pin RS-232 connector on the rear panel.
PAGE 13
AM/FM STEREO DUAL TUNER This appliance has a serial number located on the rear panel. Please record the model number and serial number and retain them for your records Model number: Serial number: XDT77 Xantech Corporation 13100 Telfair Avenue, Second Floor Sylmar, CA 91342-3573 Sales: 800.843.5465 • Fax: 818.362.9506 Thank you for choosing XANTECH. Read this manual carefully to get the best performance from this unit.