HDMI4X1 User Manual www.xantech.
INTRODUCTION Congratulations on your purchase of the HDMI4X1 Switcher. The 4x1 HDMI Switcher allows access to four HDTV devices, using one HDTV display. The line offers solutions for Home Theater, AV installation, data center, information distribution, conference room presentation, school and corporate training environments. The HDMI4X1 Switcher allows four HDTV HDMI devices to be switched easily in to one HDTV HDMI compatible monitor or projector.
INSTRUCTIONS 1 Connect the supplied cables from the HDTV HDMI sources into the 4x1 HDMI Switcher inputs. 2 Connect the cables from your display (monitor or projector) into the HDMI out of the 4x1 HDMI Switcher. 3 Plug the 5VDC power supply into the 4x1 HDMI Switcher. * Adjust the EQ knob to remove signal noise resulting from longer input cables How to Control the 4x1 HDMI Switcher Use the RMT4-IR remote control to toggle between sources. RMT4-IR INSTRUCTIONS 1.
-4-
RS232 INTERFACE Binary Table ASCII 1 2 3 4 Terminal Settings Bits per second Data bits Parity Stop bits Flow Control Input 1 2 3 4 Binary 0011 0001 0011 0010 0011 0011 0011 0100 19200 8 None 1 None SPECIFICATIONS Video Amplifier Bandwidth Input Video Signal Input DDC Signal Single Link Range Input Connector Type Output Connector Type Remote Control Port Power Consumption Power Supply Dimensions Shipping Weight 1.65 GHz 1.
Technical Support Hours: 7AM-5PM Pacific Phone: 800.843.5465 press 2 for Tech Support Fax: 800.492.6832 email: tech@xantech.com Mailing Address Xantech Corporation 13100 Telfair Avenue, 2/F Sylmar, CA 91342 HDMI4X1 User Manual © 2007 Xantech Corporation This document is copyright protected. No part of this manual may be copied or reproduced in any form without prior written consent from Xantech Corporation.
