by XPower 1500 Portable Household Power t 1 408-987-6030 f 1 360-925-5143 www.xantrex.com 445-0127-01-01 REV.
by XPower 1500 Portable Household Power Owner’s Guide
About Xantrex Xantrex Technology Inc. is a world-leading supplier of advanced power electronics and controls with products ranging from small mobile units to utility-scale systems for wind, solar, batteries, fuel cells, microturbines, and backup power applications in both grid-connected and stand-alone systems. Xantrex products include inverters, battery chargers, programmable power supplies, and variable speed drives that convert, supply, control, clean, and distribute electrical power.
Important Safety Instructions Misuse of XPower 1500 may result in danger to the user. We urge you to pay special attention to all CAUTION and WARNING statements. CAUTION statements identify conditions or practices that may result in damage to XPower 1500 or to other equipment. WARNING statements identify conditions that may result in personal injury or loss of life. This chapter contains important safety and operating instructions. Read and keep this Owner’s Guide for future reference.
Safety WARNING: Heat hazard XPower 1500’s internal inverter components may become uncomfortably warm, reaching 140°F (60°C) under extended high power operation. Ensure at least 15 cm (6 in) of air space is maintained on all sides and on top of XPower 1500. During operation, keep away from materials that may be affected by high temperatures such as blankets, pillows and sleeping bags. CAUTION • • Do not connect any AC load whose neutral conductor is connected to ground, to XPower 1500.
Contents Important Safety Instructions - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - iii 1 Introduction Topics Covered in the Guide - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1–1 Features and Accessories - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1–2 Assembling the Handle - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1–3 2 Operation Power Ratings and Battery Life- - - - - - -
Contents Connecting to an External Battery- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Extended Operating Time - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Preparing the Cables - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Connecting the Cables - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Battery Replacement- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Replacing X
1 Introduction Thank you for purchasing XPower 1500 Portable Household Power, the 1500-watt electronic generator that’s portable and rechargeable. Designed for both indoor and outdoor use, XPower 1500™ can run a wide range of electrical products – from power tools to entertainment equipment, and even refrigerators. XPower 1500’s rugged, cart-like design gives you goanywhere AC power and its “plug-in-and-forget” charging system keeps it fully charged and ready for use any time the power goes out.
Features and Accessories A brief overview of XPower 1500’s features is provided below. For complete information, be sure to read this manual fully. Figure 1-1 below shows XPower 1500’s key features and accessories.
Assembling the Handle Assembling the Handle Figure 1-2 below shows how to assemble the handle and attach it to XPower 1500.
1–4
2 Operation Chapter 2 explains how to operate the XPower 1500 efficiently and effectively.
Power Ratings and Battery Life AC powered products are rated by how much electrical power (in watts) they consume. XPower 1500 is capable of generating a maximum of 1350 watts (maximum continuous) to power AC products plugged into the AC outlets. As an example, a lamp with a 40-watt light bulb can be operated from XPower 1500 for up to 9 hours when XPower 1500’s internal battery pack is fully charged.
XPower 1500 Basic Operation XPower 1500 Basic Operation Operating 115-volt AC Products 1. Ensure XPower 1500’s battery pack is fully charged. See “Recharging XPower 1500” on page 2–16 for details. 2. Turn the AC Outlets switch ON. The green POWER light indicates AC power is available at the AC outlets. 3. Plug the AC product(s) you wish to operate into the AC outlet(s) and switch the product(s) ON, one at a time. XPower 1500 will operate most devices rated up to 1350 watts. 4.
Recharging XPower 1500 1. The battery’s charge level may be seen by pressing the Battery Status switch on the AC Power Panel. 2. To recharge, plug the AC Charger into a standard 115-volt AC outlet and the DC plug into the DC Power Socket (located on the DC Power Panel). The Recharge Indicator on the AC Charger will change from amber to green when charging is complete (up to 15 hours). It is safe (and recommended) to leave the AC Charger connected indefinitely.
Indicators, Controls, and Connection Points Indicators, Controls, and Connection Points AC Power Panel As shown in Figure 3 below, the AC Power Panel contains the Battery Status Switch, Battery Level Indicator, AC Outlets Switch, AC Power Light, Fault Light, and dual AC Outlets. Figure 2-1 AC Power Panel Battery Status Switch / Battery Level Indicator The Battery Level Indicator shows the state of charge of XPower 1500’s battery pack. Its function is similar to the fuel gauge in a car.
Figure 2-2 Battery level Indicator When the battery pack is fully charged, all four lights will illuminate. When discharged (empty), only the red light will illuminate and the battery pack must be recharged promptly. Figure 4 shows the battery pack to be approximately ¾ full. Battery charge level is indicated most accurately when the battery pack has been unused for 15 minutes. Pressing the Battery Status Switch while supplying power to an AC product may result in a false battery charge level reading.
Indicators, Controls, and Connection Points Figure 2-3 DC Power Panel Important: The vents below the DC Power Socket should never be covered or blocked when XPower 1500 is used. These vents are essential for maintaining optimal performance.
High Power 12volt DC Terminals Referenced in Figure 6 below, the High Power DC Terminals are wired directly to XPower 1500’s battery pack and supply power for jumpstarting a vehicle. See “Vehicle or Boat Engine Starting” on page 2–14 for details. These terminals also can be used to connect an external battery, which can increase XPower 1500’s total battery capacity and extend operating times. See “Connecting to an External Battery” on page 2–20 for details.
Powering 115-volt AC Products Powering 115-volt AC Products XPower 1500 is capable of powering most 115-volt AC products and equipment that use 1350 watts or less. Its AC output waveform, called a “quasi-sine wave” or “modified sine wave”, is designed to function similarly to the sine wave shape of utility power.
3. While operating the AC product you can check the level of the battery as detailed in Figure 2-2, “Battery level Indicator” on page 2–6. This will tell you the approximate charge level of the battery and whether you are approaching the point when recharging is required. 4. As the battery pack becomes nearly discharged, or “empty”, a low voltage warning will sound. This will give you time to shut down a computer, for example.
Powering 115-volt AC Products Battery Operating Times Below are typical AC products that may be operated by XPower 1500 with estimated operating times. See “Connecting to an External Battery” on page 2–20 for information about connecting to an external battery to increase operating time. Operating times will vary depending on the battery charge level and the actual AC product being operated.
Powering 12-volt DC Accessories Connecting 12-volt DC Accessories XPower 1500 can operate any accessory that is intended to run from a vehicle’s lighter socket. Simply insert the accessory’s plug into the DC Power Socket on XPower 1500’s DC Power Panel. XPower 1500’s DC Power Socket will operate any 12-volt DC auto, marine or other 12-volt accessory that draws 12 amps or less.
Powering 12-volt DC Accessories Battery Operating Times Below are typical DC accessories that may be operated by XPower 1500 with estimated operating times. Operating times will vary depending on the battery charge level and the specific accessory being operated.
Vehicle or Boat Engine Starting Jump-starting Directly to the Battery XPower 1500 may be used to jump-start a 12-volt vehicle or small boat engine using standard jump-start cables available from most auto parts stores. Jump-starting causes very high current surges and possible sparking. Unless care is taken, the possibility of battery explosion exists. Read the safety warnings in the beginning of this Owner’s Guide before proceeding, then follow these instructions exactly.
Vehicle or Boat Engine Starting 7. As far from the battery as possible, connect the cable’s black negative (-) clamp to the engine block, cylinder head, or other stationary heavy metal part of the engine. Do not attach the black negative clamp to the engine’s battery terminal. 8. Take the other end of the jump-start cables and connect the black negative (-) clamp to XPower 1500’s negative High Power DC Terminal (black). You are now ready to start the engine. 9.
Recharging XPower 1500 Charging Options These charging options are possible with XPower 1500: • • • • Charging with the fully automatic “plug-in-and-forget” AC Charger. Charging from your vehicle as you drive with the DC Charging Cable. Charging from a generator equipped with a 12-volt battery charging outlet. Charging from a solar panel. Battery Self-discharge and Shelf Life All rechargeable batteries gradually discharge when left standing.
Recharging XPower 1500 Recharging with the AC Charger \ CAUTION: Equipment damage or personal injury Do not use XPower 1500 to operate any AC products or DC accessories while charging with the AC Charger. Do not use XPower 1500’s AC Charger to recharge nickel-cadmium or dry-cell batteries commonly used with home appliances and electronic equipment. These batteries may burst and cause personal injury or damage property. See the AC Charger Owner’s Guide enclosed for additional safety related information.
9. After the AC Charger is turned off or disconnected from an AC outlet, the Recharge Indicator may continue to illuminate for a brief period. This is normal and occurs because of the residual electrical energy that is stored in the AC Charger’s circuitry. Note: Battery Level Indicator readings will not be accurate until the batteries have “rested” for 15 minutes after charging. Recharging from your Vehicle Using the DC Charging Cable, XPower 1500 can be recharged as you drive.
Recharging XPower 1500 Recharging with a Generator’s 12-volt DC Power Outlet Recharging XPower 1500 from a generator using the AC Charger is possible, but could require extended generator running time before XPower 1500 is fully charged. Since many generators have an auxiliary regulated 12-volt DC output designed for charging 12-volt batteries, using this power source will result in a shorter recharge time.
Connecting to an External Battery Extended Operating Time Much longer battery operating time is possible when connecting XPower 1500 to an additional external battery. For example, an external 17 amphour battery will increase XPower 1500’s operating time by about 33%. Since XPower 1500 uses three 17 amp-hour batteries, we recommend connecting one or more 17 amp-hour batteries externally when you want to increase operating time. WARNING: Explosion hazard Use a sealed, non-spillable battery for indoor use.
Connecting to an External Battery The cable and connectors specified above are typically available at RV, marine, or auto parts stores. When possible, we recommend purchasing one length of cable with red insulation and the other length of cable with black insulation. Use the red cable length to connect the positive terminals and the black length of cable to connect the negative terminals.
5. Use the black Terminal Cover to fasten the 5/16” ring type connector on the other end of the negative (black or marked negative) cable to XPower 1500’s negative High Power DC Terminal (black). Again, tighten firmly, but do not over tighten. 6. To disconnect the external battery, simply follow steps 2-5 in reverse order. Important: Unless the external battery is a lead acid, 17 amp-hour, AGM design, it must be disconnected from XPower 1500 prior to recharging XPower 1500’s internal battery pack.
Battery Replacement Battery Replacement The batteries used in XPower 1500 are a high quality, state-of-the-art design that will serve as a reliable power source for years when properly maintained. To maximize battery life it is important to recharge XPower 1500’s battery pack after each use, recharge fully every three months if placed in storage, and store in a location that maintains a temperature range of 32º to 104ºF (0º to 40ºC). Also, discharging the battery pack below 10.
WARNING: Personal injury To avoid potentially serious injury, follow these precautions when working with batteries: • Someone should be within range of your voice or close enough to come to your aid when you work near a lead-acid battery. • Have plenty of fresh water and soap nearby in case battery acid contacts skin, clothing, or eyes. • Wear complete eye protection and clothing protection. Avoid touching your eyes while working near batteries.
Battery Replacement To maximize run time, select a battery with the highest amp-hour rating. It is acceptable to use batteries with ratings of 18 or 21 amp-hours provided all three batteries have the same amp-hour rating. Do not install replacement batteries unless all are sealed, lead acid, AGM designs with the same amp-hour rating and with the same manufacturer’s part number.
2–26
3 Troubleshooting Chapter 3 will help you identify the source of most problems that can occur with the XPower 1500. If you have a problem with the inverter, please review this chapter before contacting your dealer. If you are unable to solve a problem and need to contact your dealer, record the details on the form “Information About Your System” on page WA–4.
4. Try a different TV. Different models of TV sets vary greatly in their susceptibility to interference. Troubleshooting Reference Table 3-1 Troubleshooting Reference Problem Possible Cause Solution AC Product will not operate, red FAULT light is on. Product rated more than 1350 W, safety overload circuit has tripped. Use an AC product with a power rating less than 1350 W. Product rated less than 1350 W, high starting surge has tripped overload. AC product may exceed XPower 1500’s surge capability.
A Specifications Appendix A contains the mechanical and electrical specifications of the XPower 1500 Portable Household Power. Specifications are subject to change without notice.
Charging System AC charger - bulk charging current (maximum) 5A Bulk charge to float charge transition voltage (peak charging voltage) 14.4 V Float charge to bulk charge transition voltage (charge restart voltage) 13.6 V Dimensions (L W H) without handle 15.6 × 12.3 × 14.5 in (39.5 × 31.3 × 37 cm) Height (with handle) 38 in (96.5 cm) Weight 53.5 lbs (24.
Warranty and Return Information Warranty What does this warranty cover? This Limited Warranty is provided by Xantrex Technology Inc. ("Xantrex") and covers defects in workmanship and materials in your XPower 1500 Portable Household Power. This warranty period lasts for 12 months from the date of purchase at the point of sale to you, the original end user customer. You will be required to demonstrate proof of purchase to make warranty claims.
Warranty and Return What proof of purchase is required? In any warranty claim, dated proof of purchase must accompany the product and the product must not have been disassembled or modified without prior written authorization by Xantrex.
Warranty and Return Exclusions If this product is a consumer product, federal law does not allow an exclusion of implied warranties. To the extent you are entitled to implied warranties under federal law, to the extent permitted by applicable law they are limited to the duration of this Limited Warranty.
Warranty and Return Out of Warranty Service If the warranty period for your XPower 1500 Portable Household Power has expired, if the unit was damaged by misuse or incorrect installation, if other conditions of the warranty have not been met, or if no dated proof of purchase is available, your unit may be serviced or replaced for a flat fee.
