XPower Powerpack 600HD Owner's Guide

Operating 12 V DC Appliances
975-0213-01-01 19
To operate a 12 V DC appliance:
1. Open the protective cover on the left side of the XPower
Powerpack.
2. Plug the 12 V DC appliance into the DC power socket on
the left side of the unit, and turn the 12 V DC appliance
on (if required).
If the 12 V DC appliance draws more than 12 A (or has a
short-circuit defect), the internal circuit breaker of the
XPower Powerpack shuts off the power to the 12 V DC
appliance. If this occurs, unplug the 12 V DC appliance,
and the internal circuit breaker automatically resets after
a few seconds.
3. Fully recharge the XPower Powerpack as soon as
possible after each use.
As the DC power socket is internally wired directly to the
internal battery, extended operation of a 12 V DC appliance
may result in excessive battery discharge. See Caution for
“Equipment damage” on page 18.