- Xantrex Sine Wave Plus AC Conduit Box (ACCB) Owner's Guide Owner's Guide

Pre-installation
975-0046-01-01 1–9
Accessory Cable Slots
Two slots on the top and bottom of the ACCB base are provided to route
the cables for the Inverter Stacking Cable - Series (ISC-S) and the remote
Inverter Control Module (ICM) if used. These slots are covered by small
hole plugs if these accessories are not used.
If your configuration will include the use of the ISC-S or remote ICM
accessories, then determine which slot(s) will be needed and remove the
hole plug(s) for that slot only. Do not remove any hole plugs from slots
that will not be used.
Figure 1-6 Knockouts on ACCB Top Cover for Additional Circuit
Breakers
Knockout Locations
for four additional
circuit breakers