Battery Charger User Manual

Prosine 2.5/3.0 Installation & Operation Guide ix
Warranty
Warning: Limitations On Use
Please refer to your product user manual for limitations on uses of the product. Specifically, please note
that the Xantrex Prosine 2.5/3.0 Inverter/Charger is not intended for use in connection with life support
systems and Xantrex makes no warranty or representation in connection with any use of the product for
such purposes.
Please note that the Xantrex Prosine 2.5/3.0 Inverter/Charger is not intended for use as an uninterruptible
power supply and Xantrex makes no warranty or representation in connection with any use of the product
for such purposes.
Return Material Authorization Policy
Before returning a product directly to Xantrex you must obtain a Return Material Authorization (RMA)
number and the correct factory "Ship To" address. Products must also be shipped prepaid. Product ship-
ments will be refused and returned at your expense if they are unauthorized, returned without an RMA
number clearly marked on the outside of the shipping box, if they are shipped collect, or if they are
shipped to the wrong location.
When you contact Xantrex to obtain service, please have your instruction manual ready for reference and
be prepared to supply:
•
The serial number of your product
•
Information about the installation and use of the unit
•
Information about the failure and/or reason for the return
•
A copy of your dated proof of purchase
Return Procedure
1. Package the unit safely, preferably using the original box and packing materials. Please ensure that
your product is shipped fully insured in the original packaging or equivalent. This warranty will not
apply where the product is damaged due to improper packaging.
2. Include the following:
•
The RMA number supplied by Xantrex Technology Inc clearly marked on the outside of the
box.
•
A return address where the unit can be shipped. Post office boxes are not acceptable.
•
A contact telephone number where you can be reached during work hours
•
A brief description of the problem
3. Ship the unit prepaid to the address provided by your Xantrex customer service representative.
If you are returning a product from outside of the USA or Canada In addition to the above you
MUST include return freight funds and are fully responsible for all documents, duties, tariffs, and depos-
its.
If you are returning a product to a Xantrex Authorized Service Center (ASC) A Xantrex
return material authorization (RMA) number is not required. However, you must contact the ASC prior to
returning the product or presenting the unit to verify any return procedures that may apply to that particu-
lar facility.