User's Manual

Installation
3–14
Installing the XPower Plus
Do not proceed with the installation of your XPower Plus until you have
read the section, “Designing Your Installation” on page 3–2. The more
thorough your planning, the better your power needs will be met to
achieve maximum performance from your XPower Plus.
Safety Instructions
Before you start to install the XPower Plus:
• Review the “Important Safety Information” on page v.
• Do not attempt your own AC wiring unless you have the knowledge,
tools, and experience to do a safe job. A licensed electrician can
install the inverter if you do not wish to do your own wiring.
• Read and follow all Warnings and Cautions in this chapter.
Installation Tools and Materials
Tools
❐ Wire stripper
❐ Wrench for DC terminals
❐ No. 2 Phillips screwdriver
❐ Crimping tool for fastening lugs and terminals on DC cables. (You
may find it more convenient to have the crimp connectors installed
onto the DC cable by the store that sells you the cable and/or
connectors.)
Note
: If you have any installation questions or issues, please contact
Customer Service.
Phone: [phone] (toll free in North America)
1-604-420-1585 (outside North America)
Fax: [phone] (toll free in North America)
604-420-1591 (outside North America)
Email: [e-mail]