Owners Guide

Charge Controller BTS

PN: 708-0080

Quickstart Guide

owned by Xantrex LLC and its affiliates.

EXCLUS I ON FOR DOCUMENTATION UNLESS SPECIFICALLY AGREED TOI N WRITING, SELLER

(A) MAKES NOWARRANTY AS TOTHE ACCURACY, SUFFICIENCY OR SUITABILITY OFANY

TECHNICAL OR OTHER INFORMATIONPROVIDED IN ITS MANUALS OR OTHER

DOCUMENTATION; (B) ASSUMES NO RESPONSIBILITY OR LIABILITY FORLOSSES, DAMAGES,

COSTS OR EXPENSES, WHETHER SPECIAL, DIRECT, INDIRECT, CONSEQUENTIAL OR

INCIDENTAL, WHICH MIGHTARISE OUTOFTHE USE OFSUCH INFORMATION. THE USE OFANY

SUCH I NFORMATION WILL BE ENTIRELY AT THE USER’S RISK; AND (C) REMINDS YOU THATIF

THI S MANUAL IS IN ANY LANGUAGE OTHER THAN ENGLISH, ALTHOUGH STEPS HAVE BEEN

TAKEN TO MAINTAIN THE ACCURACY OFTHE TRANSLATION, THE ACCURACY CANNOTBE

GUARANTEED. APPROVED CONTENTIS CONTAINED WITH THE ENGLISH LANGUAGE VERSION

WHICH IS POSTED ATHTTP:// WWW.XANTREX.COM.

PAGE 2
What’s in the Box 15-ft BTS cable with probe and 2-pin connector probe mount plate with adhesive Insert the probe through the hole in the probe mount plate (as shown).
PAGE 3
Remove the adhesive backing from the mount plate. Clean the surface on the battery’s side where the mount plate will be attached. Attach the mount plate to the battery.
PAGE 4
Attach the 2-pin connector to the BTS port on the charge controller.
PAGE 5
+1-800-670-0707 +1-408-987-6030 customerservice@xantrex.com http://www.xantrex.com/power-products-support/ http://www.xantrex.