Xantrex Flex Solar Kit Data Sheet

AVAILABLE IN:
110W
The 110W Xantrex Solar flex kit features a flexible solar panel with 5 busbars and PERC (Passivated Emitter and Rear
Contact) mono-crystalline cells, a special cell technology that increases module efficiency significantly over standard
solar cells. Designed with a highly protective top-layer called ETFE (Ethylene-Tetra-Fluoro-Ethylene), this allows for
better light transmittance, corrosion resistance, stain-resistance, weather resistance, and overall superior durability
over a wide temperature range, compared to non-ETFE semi-flexible panels.
The solar flex kit includes a 30A charge controller and system hardware that is designed for a fast & easy
installation, including PV cables & battery cables with a built-in fuse and ring terminals and built-in ferrule
terminations for quick connections to the charge controller. To install the panel, drill the included screws through
grommets on the panel or use glue (sold separately).
Easily customize and extend your solar system using our expansion kits.
FLEXIBLE AND LIGHT, IDEAL FOR CURVED SURFACES
Copyright © 2019 Xantrex LLC. All Rights Reserved. All trademarks are owned by Xantrex LLC.
APPLICATIONS:
2 YEAR
WARRANTY
*
*WARRANTY ON PANEL CONSTRUCTION
www.xantrex.com
CUSTOMER CARE: 1.800.670.0707
TECHNOLOGY
PERC
*competitor panels do not currently use PERC technology
**Most brands use 2-4 busbars, more busbars means better efficiency & durability
***Ethylene-Tetra-Fluoro-Ethylene - extends the lifespan of the panel compared to non-ETFE panels
TECHNOLOGY
5 BUSBAR
UP TO
30°
OF FLEXIBILITY
FLEX KIT DATASHEET
ETFE
PROTECTION
** ***
*