PROWatt SW Inverter NA.book Page 1 Wednesday, August 5, 2009 2:24 PM TM TM FA PO T UL W ER RE MO TE PROwatt SW 600 shown.
PROWatt SW Inverter NA.
PROWatt SW Inverter NA.book Page i Wednesday, August 5, 2009 2:24 PM About Xantrex Date and Revision Xantrex Technology Inc. (www.xantrex.com), a subsidiary of Schneider Electric, is a world leader in the development, manufacturing and marketing of advanced power electronic products and systems for the renewable and mobile power markets.
PROWatt SW Inverter NA.book Page ii Wednesday, August 5, 2009 2:24 PM About This Guide Purpose The purpose of this Owner’s Guide is to provide explanations and procedures for operating, installing, maintaining, and troubleshooting the PROwatt™ SW Sine Wave Inverter. Scope The Guide provides safety guidelines, as well as information about operating, installing, and troubleshooting the inverter. It does not provide details about particular brands of batteries.
PROWatt SW Inverter NA.book Page iii Wednesday, August 5, 2009 2:24 PM Important Safety Instructions 3. IMPORTANT: READ AND SAVE THIS OWNER’S GUIDE FOR FUTURE REFERENCE. This chapter contains important safety instructions for the PROwatt™ SW Sine Wave Inverter. Before using the PROwatt™ SW Sine Wave Inverter, READ ALL instructions and cautionary markings on or provided with the PROwatt™ SW Sine Wave Inverter, the batteries, and all appropriate sections of this guide. 4. 5.
PROWatt SW Inverter NA.book Page iv Wednesday, August 5, 2009 2:24 PM 2. 3. 4. 5. 6. 7. Working in the vicinity of lead-acid batteries is dangerous. Batteries generate explosive gases during normal operation. Therefore, you must read this guide and follow the instructions exactly before installing or using your PROwatt™ SW Sine Wave Inverter. This equipment contains components which tend to produce arcs or sparks.
PROWatt SW Inverter NA.book Page v Wednesday, August 5, 2009 2:24 PM FCC Statement WARNING This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference and (2) this device must accept any interference received, including interference that might cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules.
PROWatt SW Inverter NA.
PROWatt SW Inverter NA.book Page vii Wednesday, August 5, 2009 2:24 PM Contents Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .iii Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Features . . . . . . . . . . . . . . . . . . . . . .
PROWatt SW Inverter NA.
PROWatt SW Inverter NA.book Page 1 Wednesday, August 5, 2009 2:24 PM Introduction Thank you for purchasing the PROwatt™ SW Sine Wave Inverter. The PROwatt SW Inverter is a high quality, true sine wave output inverter. It is designed to operate AC loads as if these loads were operating from grid/utility supplied power in household AC outlets. To get the most out of your PROwatt™ SW Sine Wave Inverter, carefully read and follow the instructions in this guide.
PROWatt SW Inverter NA.book Page 2 Wednesday, August 5, 2009 2:24 PM Introduction Ease of Use Superior features and rugged durability have been combined with ease of use: • The unit is compact, light weight, and easy to install. • You can power loads directly from the dual GFCI-protected AC receptacles on the front panel. • Easy-to-read digital display on the front panel lets you monitor system performance at a glance.
PROWatt SW Inverter NA.book Page 3 Wednesday, August 5, 2009 2:24 PM Features The following information describes the main features of the PROwatt SW Inverter. We recommend that you familiarize yourself with these features before installing and operating the unit. Owner’s Guide DC Input Materials List Your PROwatt SW Inverter package includes these items: • PROwatt SW Inverter unit, • Owner’s Guide.
PROWatt SW Inverter NA.book Page 4 Wednesday, August 5, 2009 2:24 PM Features Front Panel Details 1 7 POWER Description 3 Power Switch Button Turns the inverter ON or OFF. 4 Remote Switch Port Use to connect the optional PROwatt Remote Panel via a communications cable. 5 USB Port Powers and charges USB-enabled devices. 6 GFCI-protected AC Outlets Equipped with two AC outlets that are protected by a standard Ground Fault Circuit Interruptor (GFCI) device with reset and test buttons.
PROWatt SW Inverter NA.book Page 5 Wednesday, August 5, 2009 2:24 PM Features Serial No. Back Panel Details 4 Feature Description 3 Chassis Ground (GND) Terminal 4 Negative (–) DC Terminal Accepts lug or ring connectors appropriate to the cable size being used. See Table 1 : Voltage Drop Per Foot of DC Cable on page 10 for recommendations.
PROWatt SW Inverter NA.book Page 6 Wednesday, August 5, 2009 2:24 PM Installation Guidelines Tools and Materials Follow all instructions from this guide and instructions including safety guidelines from the battery manufacturer. Installing battery cables require some electrical knowledge and local electrical codes.
PROWatt SW Inverter NA.book Page 7 Wednesday, August 5, 2009 2:24 PM Installation Determine Battery Capacity Battery type and battery size strongly affect the performance of the PROwatt SW Inverter. Therefore, you need to identify the type of loads your inverter will be powering and how much you will be using them between charges. Once you know how much power you will be using, you can determine how much battery capacity you need. Xantrex recommends that you purchase as much battery capacity as possible.
PROWatt SW Inverter NA.book Page 8 Wednesday, August 5, 2009 2:24 PM Installation Mount The Inverter Dry Do not allow water or other liquids to drop or splash on the inverter. Cool Ambient air temperature should be between 32 ºF and 104 º F (0 ºC and 40 º C)—the cooler the better within this range. Ventilated Allow at least 2 inches (5 cm) of clearance around the inverter for air flow. Ensure that ventilation openings on the DC end and the bottom of the unit are not obstructed. 1.
PROWatt SW Inverter NA.book Page 9 Wednesday, August 5, 2009 2:24 PM Installation Connect the Chassis Ground WARNING: Risk of electrical shock. Never operate the PROwatt SW Inverter without connecting it to the ground. Electrical shock hazard could result. The PROwatt SW Inverter has a screw terminal labeled CHASSIS GND on the outside of the rear panel as shown in Figure 3, “PROwatt SW Inverter Back Panel (PROwatt SW 600 shown)” on page 5.
PROWatt SW Inverter NA.book Page 10 Wednesday, August 5, 2009 2:24 PM Installation Cabling Guidelines Follow these guidelines and refer to Table 1 : Voltage Drop Per Foot of DC Cable on page 10 to determine battery cable lengths. • Use 4 AWG copper (90 ºC insulation rating) as the smallest battery cable size. This will minimize the voltage drop between the battery and the inverter.
PROWatt SW Inverter NA.book Page 11 Wednesday, August 5, 2009 2:24 PM Fuse/Circuit Breaker Sizing Guidelines Because batteries can produce thousands of amps, you are required to install DC-rated fuses (or circuit breakers) that can safely withstand the short-circuit current batteries can produce. To select the correct fuse type and size: 1. Determine the total cold cranking amp rating for your battery(s). Note: The cold cranking amp rating of each battery is displayed on the battery case.
PROWatt SW Inverter NA.book Page 12 Wednesday, August 5, 2009 2:24 PM Installation Cabling Procedure TO VEHICLE Consult the following configurations and determine a match specific to your installation and follow the installation procedure “To connect the battery cables:” that comes next.
PROWatt SW Inverter NA.book Page 13 Wednesday, August 5, 2009 2:24 PM Installation WARNING: Risk of electrical shock or fire. CAUTION: Risk of inverter damage due to reverse polarity. The PROwatt SW Inverter does not come with a DC-rated fuse (or circuit breaker) to safely withstand the shortcircuit current batteries can produce. To avoid the risk of electrical shock or fire, install a DC-rated fuse (and fuse holder) on the positive battery terminal. 3.
PROWatt SW Inverter NA.book Page 14 Wednesday, August 5, 2009 2:24 PM Installation 7. Attach the connector on the negative cable to the negative battery terminal. Note: This is the last cable connection. You may observe a spark when making this last connection. Note: Make a secure connection. Loose connectors cause excessive voltage drop and may cause overheated wires and melted insulation. 8. If you have installed a battery selector switch, use it to select one of the batteries or battery banks. 9.
PROWatt SW Inverter NA.book Page 15 Wednesday, August 5, 2009 2:24 PM Operation Turning the Inverter On and Off Turning the Inverter Off Between Charges The power switch on the inverter’s front panel turns the control circuit in the PROwatt SW Inverter on and off. To toggle the inverter on and off from its front panel: When the power switch is on but no power is being supplied to a load, the inverter draws less than 800 mA from the battery. This is a low current draw.
PROWatt SW Inverter NA.book Page 16 Wednesday, August 5, 2009 2:24 PM Operation To test (or reset) the GFCI protection: 1. Press the unit’s power switch to turn the inverter On. 2. Plug a test lamp into the AC outlet. 3. Push the TEST button. Note: The RESET button should pop out and the power should turn Off (the lamp should go out). If the lamp remains lit, or if the RESET button does not pop out, the GFCI may not be functioning.
PROWatt SW Inverter NA.book Page 17 Wednesday, August 5, 2009 2:24 PM Operation Operating Limits Power Output The PROwatt SW Inverter will deliver the following power continuously, depending on input voltage and ambient temperature. The inverter will deliver more than 10% of its continuous power rating for approximately five minutes. The inverter must cool down for 15 minutes before it can resume operation above its continuous power rating.
PROWatt SW Inverter NA.book Page 18 Wednesday, August 5, 2009 2:24 PM Operation The PROwatt SW Inverter will operate many AC loads within its power rating. However, some appliances and equipment may be difficult to operate. Please see “Exceptional Loads” below carefully. diameter of the battery cables are appropriate. Check that the battery connections are good and that the battery is fully charged.
PROWatt SW Inverter NA.book Page 19 Wednesday, August 5, 2009 2:24 PM Troubleshooting WARNING: Electrical shock and burn hazard. Do not dismantle the PROwatt SW Inverter. It does not contain any user-serviceable parts. Attempting to service the unit yourself could result in an electrical shock or burn. Troubleshooting Reference Condition Possible Cause Solution E.0.1. Under Voltage (low input) shutdown Recharge the battery. Check cables and connection if secure. E.0.1.
PROWatt SW Inverter NA.book Page 20 Wednesday, August 5, 2009 2:24 PM Troubleshooting Condition Possible Cause Solution Condition Possible Cause Solution E.1.0. No output voltage. Short circuit Check the AC wiring for a short circuit. No output voltage; no voltage indication. Very heavy load Remove the load. The unit is off. No power to the inverter. Inverter fuse open. Reverse DC polarity. Output circuit overheat Turn the unit off.
PROWatt SW Inverter NA.book Page 21 Wednesday, August 5, 2009 2:24 PM Specifications Note: Specifications are subject to change without prior notice. Physical and Environmental Specifications AC / USB Output 600 1000 Surge power 1200 W 2000 W 3000 W Output current (continuous) 4.6 A 7.5 A 15 A Output current (max) 5.8 A 9.6 A 19.2 A No load current draw < 600 mA < 600 mA < 800 mA Length × Width × Height • PROwatt SW 600 • PROwatt SW 1000 • PROwatt SW 2000 12.2×8.7×3.5 inch. (31×22×8.
PROWatt SW Inverter NA.book Page 22 Wednesday, August 5, 2009 2:24 PM Warranty and Return Information Warranty What does this warranty cover and how long does it last? This Limited Warranty is provided by Xantrex Technology Inc. ("Xantrex") and covers defects in workmanship and materials in your PROwatt™ SW Sine Wave Inverter.
PROWatt SW Inverter NA.book Page 23 Wednesday, August 5, 2009 2:24 PM What proof of purchase is required? In any warranty claim, dated proof of purchase must accompany the product and the product must not have been disassembled or modified without prior written authorization by Xantrex.
PROWatt SW Inverter NA.book Page 24 Wednesday, August 5, 2009 2:24 PM Warranty and Return Information Disclaimer Exclusions Product If this product is a consumer product, federal law does not allow an exclusion of implied warranties. To the extent you are entitled to implied warranties under federal law, to the extent permitted by applicable law they are limited to the duration of this Limited Warranty.
PROWatt SW Inverter NA.book Page 25 Wednesday, August 5, 2009 2:24 PM Warranty and Return Information Return Material Authorization Policy Return Procedure For those products that are not being repaired in the field and are being returned to Xantrex, before returning a product directly to Xantrex you must obtain a Return Material Authorization (RMA) number and the correct factory "Ship To" address. Products must also be shipped prepaid.
PROWatt SW Inverter NA.book Page 26 Wednesday, August 5, 2009 2:24 PM Warranty and Return Information Information About Your System As soon as you open your PROwatt™ SW Sine Wave Inverter package, record the following information and be sure to keep your proof of purchase.
PROWatt SW Inverter NA.
PROWatt SW Inverter NA.book Page ii Wednesday, August 5, 2009 2:24 PM Xantrex Technology Inc. 1 800 670 0707 Tel toll free NA 1 408 987 6030 Tel direct 1 800 994 7828 Fax toll free NA customerservice@xantrex.com www.xantrex.