Specification Sheet

Smart choice for power
™
Xantrex Technology Inc.
3700 Gilmore Way
Burnaby, British Columbia
Canada V5G 4M1
800 670 0707 Toll Free
604 420 1591 Fax
541 Roske Drive, Suite A
Elkhart, Indiana
USA 46516
800 446 6180 Toll Free
574 294 5989 Fax
Xanbus
™
AUTOMATIC GENERATOR START
Automatically Starts & Stops Generator When Power is Needed
The New Xanbus Automatic Generator Start (AGS) is a control module that automatically activate a
generator to provide Freedom SW Inverter/Charger* with power to recharge depleted batteries or assist
with heavy loads. Having an AGS in your system means that power is available and battery banks are
charged automatically so you do not have to spend time monitoring power consumption.
The AGS can be customized to suit each user’s preferences. A user can define whether the generator
should be activated by low battery voltage, battery state of charge, thermostat operation, or load
size on the inverter. A Quiet Time setting prevents the generator from starting at inconvenient times
like nightfall. LED lights display the status of the AGS, while all user defined settings are programmed
through the Xanbus System Control Panel (SCP).
The AGS is configured and controlled by the Xanbus System Control Panel (SCP). The SCP provides you
with comprehensive control of your AGS through a user friendly interface that is easy to understand and
operate.
*Important Note
New AGS (part# 809-0915) applies to the new generation Freedom SW Inverter/Chargers, part#
815-2012 and 815-3012
Use AGS (part# 809-0916) for the first generation Freedom SW 3000 Inverter/Charger, part# 815-3000
Product Features
External input signal for emergency shutdown option
Quiet time periods can be set to avoid inappropriate generator operation
Dual thermostat input available to control up-to two air conditioners
Activated by battery voltage, state of charge or inverter load current
Compatible with most popular generators
www.xantrex.com