Product Manual
Table Of Contents
- Important Safety Instructions
- Introduction
- Installation Information
- About the Xanbus System
- Planning the Installation
- Planning Preparations
- Installing the Inverter/Charger
- Overview
- Step 1: Choosing a Location for the Inverter/Charger
- Step 2: Mounting the Inverter/Charger
- Step 3: Connecting the AC Input and AC Output Wires
- Step 4: Connecting the DC Cables
- Step 5: Connecting the Battery Temperature Sensor (BTS)
- Step 6: Connecting to the Network
- Step 7: Performing Checks Prior to Initial Start-Up
- Step 8: Testing Your Installation
- Stacking Features
- Inverter/Charger Physical Specifications
- Battery Information
- Battery Cabling and Hook-up Configurations
- Specifications
- Inverter Drip Shield Installation
975-0697-01-01 33
Installing the Inverter/Charger
This guide for use by qualified personnel only.
Step 5: Connecting the Battery Temperature Sensor (BTS)
Installing a battery temperature sensor (BTS) extends the life of a
battery by preventing overcharging in warm temperatures and
undercharging in cold temperatures. With a BTS monitoring the
battery temperature, the voltage delivered to the battery is adjusted
according to the battery’s actual temperature.
The BTS has a self-adhesive backing and attaches to the side of the
battery. A 7.6 m cable is supplied with the BTS.
Mounting Options
You can mount the BTS in one of two ways:
• Mounting the sensor to the negative battery post allows the
internal battery temperature to be sensed and provides the most
accurate results.
• Attaching the sensor to the side of the battery using the self-
adhesive backing also provides good results in most situations.
Figure 10 BTS with Cable
EQUIPMENT DAMAGE
Use only the Freedom SW 230V-compatible Battery Temperature Sensor
(BTS). To order a spare BTS, call customer service and order part number
809-0946.
Failure to follow these instructions can damage the unit and/or
damage other equipment.
Connector
Sensor cable
Sensor
Freedom SW 3K2K 230V InvChg Install Guide.book Page 33 Friday, June 20, 2014 9:11 AM