Product Manual
Table Of Contents
- Exclusion for Documentation
- Document Part Number
- Date and Revision
- Product Numbers
- Contact Information
- Information About Your System
- Purpose
- Scope
- Audience
- Conventions Used
- Related Information
- Introduction
- System Components
- Freedom SW Inverter/Charger Mechanical Features
- Freedom Inverter/Charger Operation
- Operating the Freedom SW with the SCP
- Configuring the Freedom SW using the SCP
- Battery Charging Reference
- Troubleshooting
- Specifications
97-0019-01-01 11
Freedom Inverter/Charger Operation
Start Up Behavior
When the Freedom SW is powered up or has been reset, all of the front
panel lights illuminate and remain on for a minimum of five seconds.
During this interval, the fans are also turned on as the unit executes internal
diagnostics.
The Freedom SW inverter is disabled every time the Freedom SW is
powered up. After power up, the INVERTER ENABLE button (or the SCP)
can be used to enable or disable the inverter.
When a function is enabled, it is allowed to occur but other conditions may
have to be met before the function is activated or turned on. For example,
the charger function on the Freedom SW may be enabled, but it will not
charge unless qualified AC power is present.
IMPORTANT:
Review the “Important Safety Instructions” on page iv
before operating the inverter/charger.
Freedom SW 3K2K InvChg Owners Guide.book Page 11 Wednesday, October 9, 2013 1:34 PM