Freedom XC PRO Marine Owners Guide
Table Of Contents
- Important Safety Instructions
- Introduction
- Features
- Installation
- Before You Begin the Installation
- Installation Codes
- Basic Installation Procedures
- Step 1: Designing the Installation
- Step 2: Choosing a Location for the Unit
- Step 3: Mounting the Unit
- Step 4: Connecting the AC Input Wires
- Step 5: Connecting AC Output to an Existing AC Circuit
- Step 6: Connecting the DC Cables
- Step 7: Connecting to Port(s) on the Freedom XC PRO
- Step 8: Testing Your Installation
- Marine Installation
- Operation
- Routine Maintenance
- Troubleshooting
- Specifications
Display Panel
975-0799-01-01 11
Display Panel
1
OUTPUTBATTLOAD
kW
100%
25%
Hz
VA
%
kW
Hz
VA
%
C
INPUTBATTTEMP
AC
BYPASS
ERROR
OVERLOAD
CHARGING
888 888
88
2 3 4
5
OUTPUTBATTLOAD
kW
100%
25%
Hz
VA
%
kW
Hz
VA
%
C
INPUTBATTTEMP
AC
BYPASS
ERROR
OVERLOAD
CHARGING
888 888
88
1
2 3 4
5
Figure 4 Display Panel
Item Description
1
Display panel displays status information on the screen. It
is comprised of a display screen, LEDs, and buttons.
2
Multi-function LCD screen shows status information and
error codes.
3 Status LEDs indicate the mode of operation.
4
Three function buttons change status information
displayed on the screen. Also, changes inverter/charger
settings. See Freedom XC PRODisplay Panel on page 52
for detailed information on the panel’s buttons.
5
Power[Standby]button is pressed for turning on the unit.
The inverter turns on for the loads and when applicable,
the charger turns on automatically.
Table 2Display Panel Features