Freedom XC PRO Marine Owners Guide
Table Of Contents
- Important Safety Instructions
- Introduction
- Features
- Installation
- Before You Begin the Installation
- Installation Codes
- Basic Installation Procedures
- Step 1: Designing the Installation
- Step 2: Choosing a Location for the Unit
- Step 3: Mounting the Unit
- Step 4: Connecting the AC Input Wires
- Step 5: Connecting AC Output to an Existing AC Circuit
- Step 6: Connecting the DC Cables
- Step 7: Connecting to Port(s) on the Freedom XC PRO
- Step 8: Testing Your Installation
- Marine Installation
- Operation
- Routine Maintenance
- Troubleshooting
- Specifications
Basic Installation Procedures
16 Freedom XC PRO Owner's Guide
Basic Installation Procedures
This section provides sample installation information as a guide
for your installation. For your convenience, the overall procedure
is divided into these main steps:
Step 1: Designing the Installation 17
Step 2: Choosing a Location for the Unit 23
Step 3: Mounting the Unit 24
Step 4: Connecting the AC Input Wires 26
Step 5: Connecting AC Output to an Existing AC Circuit 31
Step 6: Connecting the DC Cables 35
Step 7: Connecting to Port(s) on the Freedom XC PRO 40
Step 8: Testing Your Installation 47
NOTE: For marine applications, see additional installation
instructions on page 49.