Xantrex Freedom Remote Specifications

Xantrex Technology Inc.
Headquarters
8999 Nelson Way
Burnaby, British Columbia
Canada V5A 4B5
800 670 0707 Toll Free
604 420 1591 Fax
541 Roske Drive, Suite A
Elkhart, Indiana
USA 46516
800 446 6180 Toll Free
574 294 5989 Fax
www.xantrex.com
© 2005, 2008 Xantrex Technology Inc. All rights reserved. Xantrex and Smart choice for power are trademarks of Xantrex International, registered in the U.S. and other countries.
Printed in Canada
Freedom Remote Control Panel
Monitors and Controls Inverter/Charger System
The Freedom Remote Control Panel allows you to control your Freedom Combi, Freedom 458 and
Freedom Marine Series Inverter/Charger system from any convenient location. With controls that
can be accessed directly from the front panel, it is easy to read, operate and install.
Product Features
Independent invert and charge on/off controls
Push button control of power sharing, equalizing, battery set-up
Multi-colored LED displays battery state of charge, fault conditions,
AC input, DC voltage and DC amperage
LED warning indictors for low battery and overload warning
Splash resistant design
Incoming AC breaker selection allows programmable power sharing
Easy to install
One year warranty
Note: The 24-volt models of Freedom Combi inverter/chargers require a different Freedom Remote.
Specifications
Voltage bar graph 10.0 – 15.5 VDC
DC amps bar graph
Idle mode = off
Loaded = <10 300 DC amps
Operating temperature range
0 – 70°C
Compatible battery types
wet/gel/AGM
Design
Splash resistant
Dimensions (L x W x D)
5.75 x 3.75 x 1.75” (146 X 95 X 25 mm)
Cutout size (W x H)
4.875 x 2.875” (116 X 73 mm)
Weight
3 oz (85 g)
Warranty
One year
Part number
84-2056-01
Note: Specifications subject to change without notice.
Battery Status and Freedom
Inverter/Charger Remote
Control