Safety Data Sheet (SDS)

ManualsBrandsXantrex ManualsSolar & Wind Power12V 125Ah Lithium-Ion Battery

Process / Document Owner: Xantrex LLC

Document Revision: Rev C Date: July 2022

970-0110-01-01 Xantrex Battery SDS

Property of Xantrex LLC

When printed, this document is uncontrolled. 970-0110-01-01_Rev-C

SAFETY DATA SHEET

1.0 Chemical Product and Company Identification

1.1 Product identifiers

Product brand name and number

Xantrex 105Ah 12V Battery (PN: 883-0105-12, 883-0105-12-02),

Xantrex 125Ah 12V Battery (PN: 883-0125-12, 883-0125-12-02),

Xantrex 240Ah 12V Battery (PN: 883-0240-12, 883-0240-12-02).

Product type Rechargeable lithium-ion battery pack, LiFePO

(LFP)

Also known as

Xantrex Battery,

Xantrex Li-ion battery,

e-GEN battery.

1.2 Relevant identified uses

Recommended applications

Auxiliary energy storage for recreational vehicles

1.3 Supplier Details

Manufacturer

Xantrex LLC

Address 541 Roske Drive,

Suite A, Elkhart,

Indiana, 46516

USA

Contact Information

Toll Free: 1-800-670-0707

Fax: 574-975-2720

Website: http://www.xantrex.com/contacts/

Emergency Contact

PERS Emergency Response Service

CALL: 1-800-633-8253 (USA/Canada), 1-801-629-0667 (International)

Reference Account Number: 12202

Summary of content (11 pages)

PAGE 1
Process / Document Owner: Xantrex LLC Document Revision: Date: Rev C July 2022 970-0110-01-01 Xantrex Battery SDS SAFETY DATA SHEET 1.0 Chemical Product and Company Identification 1.1 Product identifiers Product brand name and number Xantrex 105Ah 12V Battery (PN: 883-0105-12, 883-0105-12-02), Xantrex 125Ah 12V Battery (PN: 883-0125-12, 883-0125-12-02), Xantrex 240Ah 12V Battery (PN: 883-0240-12, 883-0240-12-02).
PAGE 2
.0 Hazards Identification The product should not present a health hazard when used under reasonable conditions and in accordance with manufacturer’s instructions with adherence to local rules and regulations. The lithium-ion battery is designed with one of the safest available current lithium-ion technologies – Lithium Iron Phosphate (LiFePO4) [aka LFP].
PAGE 3
4.0 First Aid Measures 4.1 Description of first aid measures Eye • • Skin • • Inhalation • • • Ingestion • • • Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Do not rub eyes with hand. Check for and remove any contact lenses if possible. Get medical aid immediately. if skin irritation occurs, remove contaminated clothing and shoes and flush skin with plenty of water and soap or shower for 15 minutes.
PAGE 4
6.0 Accidental Release Measures 6.1 Steps to be taken in case material is released or spilled • • • • • • • • Use proper personnel protection equipment (PPE) as indicated in Section 8. In case of leakage, evacuate personnel from area immediately. Do not pass through the spilled area. Safely remove all sources of ignition or heat. Prevent unnecessary or unprotected personnel from entering the area. Avoid skin and eye contact and breathing vapors, mist, or gas.
PAGE 5
8.0 Exposure Controls and Personal Protection 8.1 Exposure Limits Chemical Name Aluminum (Al) CAS Number 7429-90-5 Copper (Cu) 7440-50-8 ACGIH NIOSH OSHA TLV-TWA: 10 mg/m3 (dust) REL-TWA: 10 mg/m3 (total) PEL-TWA: 15 mg/m3 (total) TLV-TWA: 5 mg/m3 (pyrotechnic powders) REL-TWA: 5 mg/m3 (respirable) REL-TWA: 5 mg/m3 (respirable) TLV-TWA: 0.
PAGE 6
9.0 Physical and Chemical Properties Nominal Voltages 12Vdc (rated 12.8Vdc) Rated Capacity 105Ah (PN: 883-0105-12, 883-0105-12-02), 125Ah (PN: 883-0125-12, 883-0125-12-02), 240Ah (PN: 883-0240-12, 883-0240-12-02). Rated Energy 1.344kWh (PN: 883-0105-12, 883-0105-12-02), 1.600kWh (PN: 883-0125-12, 883-0125-12-02), 3.072kWh (PN: 883-0240-12, 883-0240-12-02).
PAGE 7
10.0 Stability and Reactivity This section describes the reactivity hazards of the chemical and the chemical stability information. Reactivity The product is stable under normal conditions. If battery leakage occurs, the internal materials may react with strong oxidizers, strong acids, strong bases, etc. Chemical stability The product is stable under normal conditions. Conditions to Avoid Incompatible materials, any sources of ignition or heat (e.g.
PAGE 8
14.0 Transport Information The LITHIUM IRON PHOSPHATE BATTERY (LiFePO4) [LFP] complies with UN/DOT 38.3 tests, according to SECTION IA of PACKING INSTRUCTION 965 of IATA DGR 63rd Edition (2022) for transportation. Cargo Aircraft weight limit: Xantrex 105Ah 12V Battery (PN: 883-0105-12, 883-0105-12-02) = complies, ≤ 35kg Xantrex 125Ah 12V Battery (PN: 883-0125-12, 883-0125-12-02) = complies, Xantrex 240Ah 12V Battery (PN: 883-0240-12, 883-0240-12-02) = complies. 14.
PAGE 9
Labeling requirements for packaging are provided below. The following placard must be placed visibly in proportion to crate size but must be no less than 120mm x 110mm. The additional following placard must also be placed visibly in proportion to crate size but must be no less than 120x110mm. When a battery is shipped individually, the package box must be applied with the following information. a. "Lithium-ion batteries: UN 3480” b. United Nations Packaging Symbol: “ ” c.
PAGE 10
15.
PAGE 11
17.0 Revision summary Revision Date of Revision Description Draft 29-Apr-2021 Draft of document. A 14-June-2021 Final draft document. (approved internally) B 30-Mar-2022 Revised to remove Xantrex 320Ah, 12Vdc Battery (PN: 883-0320-12) and Update transport information. C 13-Jul-2022 Update to add Gen2 battery series to the Gen1 battery series. 18.0 Disclaimer The above information is based on the data of which we are aware and is believed to be correct as of the date hereof.