Owners Guide

Materials List
975-1044-01-01 7
Introduction
The Xantrex Lithium-ion Batteries are lithium iron phosphate
(LiFePO
4
) chemistry batteries used in conjunction with the
internal Battery Management System (BMS) unit which protects
the batteries and monitors state-of-charge (SOC), voltage,
current, and temperature.
Figure 1 Typical System
Lithium-ion
Battery Pack
BMS
POWER SYSTEM
This guide provides instructions on how to safely install,
operate, and maintain your Xantrex battery system.
Materials List 7
Before You Begin 7
Installation Tools and Materials 8
Installation Codes 8
Materials List
The Xantex Battery base package includes the following items.
A B C
Figure 2 Materials List
A Xantex Battery
B Quickstart guide
C Rebling connector
NOTE: If any of the items are missing, contact Xantrex or any
authorized Xantrex dealer for replacement.
IMPORTANT: Keep the carton and packing material in case
you need to return the lithium-ion battery for servicing. The
battery requires special packaging and handling due to the
nature of the product.
Before You Begin
Before beginning your installation:
n Read this entire Installation guide so you can plan the
installation from beginning to end.
n Assemble all the tools and materials you require for the
installation.
n Review the Safety Information on page 4.
n Be aware of all safety and electrical codes which must be
met.
WARNING
ELECTRICAL SHOCK AND FIRE HAZARD
n All wiring should be done by qualified personnel to ensure
compliance with all applicable installation codes and
regulations.
n Disable and secure all DC disconnect devices and
automatic generator starting devices.
n Do not mount in a zero-clearance compartment.
Failure to follow these instructions can result in death, serious
injury, or equipment damage