KAMIENIEC analog resonant phase rotator operator’s manual rev. 1977/1.
module explained SALUT signed with modern components and low noise opamps to bring down the noise floor, improve the bandwidth, and offer a wider range of tuning. The feedback control can be set extremely deep, which results in a very high resonance that is capable of self-oscillation. This produces a unique sound otherwise unreachable for typical phasers, that can vary from subtle and creamy to utterly brutal and grinding.
front panel overview fig.
20 dB especially at extreme settings! For the safety of fig. 3 HI RESO 10 your ears (and speakers/headphones) we advise setting the reso knob to zero when patching the 0 module for the first time. -10 The function of the resonance mode switch -20 7 is relevant to the reso knob operation. The wasted and stoned modes select four or six -30 LO RESO -40 phaser stages in the feedback path allowing for -50 a variety of sound flavours.
phaser: the principle A typical internal structure of a phaser-type effect features a chain of stages that produce a shift in phase. Each stage comprises an all-pass filter that, by nature, does not attenuate any frequency components, but instead, shifts the phase of certain spectral components of the signal by employing a very short frequency-dependent delay. Human ears cannot easily detect phase differences unless the phase shifted signal is mixed with the original dry signal.
main features WARRANTY TERMS XAOC DEVICES WARRANTS THIS PRODUCT TO BE FREE OF DEFECTS IN MATERIALS OR WORKMANSHIP, AND TO CONFORM WITH THE SPECIFICATIONS AT THE TIME OF SHIPMENT FOR A PERIOD OF ONE YEAR FROM THE DATE OF PURCHASE. DURING THAT PERIOD ANY MALFUNCTIONING OR DAMAGED UNITS WILL BE REPAIRED, SERVICED, AND CALIBRATED ON A RETURN-TO-FACTORY BASIS.
