User manual
4
step
7
. This section uses the knobs to set the
CV value present at the CV output for each step
and uses the buttons to activate/deactivate
each respective step. An active step generates
signal at the gate out output
8
. Note that
the cv out always sends the voltage set for each
Moskwa is equipped with three inputs situated
-
transport
input
9
-
reset input
10
resets the
direction
input
11
reverses the direction of the sequence.
knobs and three buttons. The rand play knob
12
clockwise increases the probability of replacing
-
-
quence to the current panel settings. The slew
knob
13
to the length of a whole step. The probability
knob
14
setting inversions (activated by steps 2-4 in
the step mode
-
-
ent for each step. The custom/shift button
15
-
control giving access to secondary functions.
The step/quant button
16
chooses the step
mode
(press and hold). The patt/preset button
17
activates the pattern mode
front panel
overview
2
6
9
12
15
10
1