User manual
6
Each button has a LED indicating various
-
MODES: STEP & PATTERN
step mode and pattern
mode. The principal functionality for both
events. Press the corresponding step or patt
STEP MODE
In the step mode, the step buttons activate and
deactivate the gate/trigger signal for each se-
You deactivate the step to create a pause for the
duration of that particular step. To enter the
step button for one second. More details on the
advanced settings are presented later in this user
PATTERN MODE
is triggered.
Patterns enable the user to achieve ratchet-
single gate/trigger on the given step of the
eight gate/triggers. Depending on the pattern
playback mode,-
that particular step will not produce any gate/
trigger signal.
QUANTIZATION
Pressing and holding the step/quant button
-
to the step/quant button.
selected via the step buttons. The active scale
is indicated by a green backlight. When you
choose one of the scales and then send Moskwa’s
CV output to a frequency input of a 1V/oct os-
-
sponding to the given scale. Don’t forget to tune
your oscillator to the root note of your choosing.
step or patt.
Available scales: chromatic, major, minor,
major pentatonic, minor pentatonic, ake-
bono, arabian, phrygian.
CUSTOM SEQUENCE
The shift/custom-
custom
sequence. This function is available only in the
step mode custom sequence
press and hold the shift/custom button while
pushing the step buttons in the desired order.
When you release the shift/custom
the default step order will be replaced by the
custom sequence. The custom sequence can
be as long as 256 steps. The custom sequence
playback is indicated by a yellow LED next to the
shift/custom button. The custom sequence
step mode)