User manual
8
the probability knob.
step 3 • step prob button activates the proba-
bility function for the gate/trigger of the edited
step.
step 4 • patt prob button activates the prob-
ability function for turning the pattern on and
off for the given step.
step 5 • skip button activates the skip func-
a shorter sequence.
step 6-8 buttons select the type of signal pres-
ent at the gate out.
output signal is a gate. Its length is a direct copy
of the width of the external clock pulse (with the
step). When the step 6 • trig
the output of the gate out changes to trigger.
step 7 • gate half button activates a gate
with a duration of half the step length (or half
step 8 • gate merge button button activates a
legato style gate lasting the entire length of the
PATTERN EDITING
pattern mode by pressing the patt button then
select a step by pressing one of the eight step
1-8
is audible yet. Hold the step 1-8 button for one
second to enter edit mode.-
edited. The selected steps light up green.
The default pattern has eight steps with only
hold the shift
last pattern step using the step buttons. The
length of a given pattern is indicated by a red
backlight.
Now you are ready to activate pattern steps
pressing the step 1-8
pattern steps light up yellow. To exit the pattern
patt or step.
In the pattern mode, you can choose the pat-
press and hold shift and press a step button of
your choosing. There are two options: a red back-
light indicates the default div pattern mode in
which the entire pattern lasts for the duration
pattern step lasts for the duration of a fraction of
-
step backlight indicates mult pattern mode in
which each pattern step lasts for the duration
steps in the pattern for the given step. This setting
is unique for each step.
In pattern mode, the steps that have been pro-
yellow for mult pattern mode