OSTANKINO sequence commander ii operator’s manual rev. 1965/X/2.
module explained SALUT The first row features inputs for the random (random play) 1 , slew 2 , and prob (prob- Thank you for buying this Xaoc Devices prod- ability) 3 parameters of Moskwa II. uct. Ostankino II [ˌɔstanˈkinɔ] is an expander for the Moskwa II sequencer module.
front panel overview fig.
With careful planning (attenuating and off- mode, the outputs send gates for the corre- setting the incoming CV) one can move the sponding steps 1-8. When the step is inactive, shortened sequence around, which greatly there is no signal at its corresponding Os- enhances Moskwa II’s already vast sequence tankino II output 1-8 (depending on the set- mangling functionality. ting on the Moskwa II module). The outputs send voltages within the range of 0-5V. The fourth row deals with one function only.
connecting the expander to another Moskwa II chaining connector fig. 2: connecting the ostankino ii to moskwa ii and drezno to e.g. Drezno in connector on the back With the switch set to the bit out position, the currently active sequence step.
MAIN FEATURES WARRANTY TERMS XAOC DEVICES WARRANTS THIS PRODUCT TO BE FREE OF DEFECTS IN MATERIALS OR WORKMANSHIP AND TO CONFORM WITH THE SPECIFICATIONS AT THE TIME OF SHIPMENT FOR ONE YEAR FROM THE DATE OF PURCHASE. DURING THAT PERIOD, ANY MALFUNCTIONING OR DAMAGED UNITS WILL BE REPAIRED, SERVICED, AND CALIBRATED ON A RETURN-TO-FACTORY BASIS.
