User manual

MINI USB
CONNECTOR
FOR FIRMWARE
UPDATES
REMOVE
JUMPERS TO
CONNECT
POTI MODULE
POWER
CONNECTOR
– 12V
REV. 10–2015
BATUMI
1974 QUAD LOW FREQUENCY OSCILLATOR
TAP TEMPO MODE
WAVEFORM SELECTION
SAW UP
SAW DOWN
TRIANGLE
TRAPEZOID
UPDATE
SALUT
Thank you for purchasing this Xaoc Devices product. Poti is a simple but very
useful breakout expander for the Batumi quadruple LFO module by Xaoc
Devices.
Its panel provides an immediate access to the Batumi functions originally
selected by the cluster of jumpers on the back of the module:
reset/sync mode option
asgn)
INSTALLATION
 
1
on the back of Batumi. Re-
move all the jumpers.
2. Plug the Poti ribbon connector
2



         

OPERATION

3

the reset/sync inputs on the panel.

4
-
livered to the saw/asgn
the Poti panel.
For more information on the reset/sync and saw/asgn
refer to the Batumi manual available on .
module
explained
SYNC
3
1 2
4