User manual

5
chAnnel mutinG
Regardless of the current mode, a short-press
on the active|mode button silences the cor-
responding channel. This state is indicated
by the deactivation of the corresponding
-
ing a few-millisecond fade-out to near -90dB.
Pressing the button again brings the channel
back through a similar clickless fade-in and

The operation of mutes can be controlled
remotely through the expander pins at the
back of the unit. The planned Hrad expan-
sion module offers four gate inputs for auto-
mated channel muting.
PAn cOntROl
Praga offers both manual and CV control
over the position of each channel in the out-
put stereo panorama. The pan knobs act
as offsets to the pan input control voltages
        
 
-
itoring setup (3dB pan law), however as
channel gain approaches 0dB, the response
is slightly compressed so as to prevent an in-

VcA OutPuts
A direct vca out on each channel uses a sep-
arate VCA chip to provide a pure copy of the

block
diagram
vu
aux
control
CV
volume
stereo
output
AUX
sends
CV
pan
signal
input
mute AUX
return
1+2
VCA
output
chain
output
chain
input
pan vol
vu
aux
control
CV
volume
CV
pan
signal
input
mute
VCA
output
pan vol
main summing bus
aux summing bus
insert
point
insert
point
1 2 3 4