User manual

SALUT
Thank you for purchasing this Xaoc Devices
product. Sarajewo  is an analog
delay module based on old school (but newly
manufactured) BBD (Bucket Brigade Delay)
chips. It features three delay taps, an external
clock input with various tempo sync factors,
and a wide range of settings controllable via
CV. It is based on high quality components
with maximum effort put towards the highest
sound quality possible, while still preserving
the charm of the BBD technology. The module
offers a clean and warm analog sound with
tons of character and a comfortable user in-
terface with a tap tempo button, signal level
indicators, sync and CV inputs, four signal out-

INSTALLATION
The module requires 12hp worth of free space
in the Eurorack cabinet. The ribbon-type pow-
er cable must be plugged into the bus board,
paying close attention to polarity orientation.
The red stripe indicates the negative –12v rail
and should point in the same direction on both
the bus board and the unit. The module itself
is secured against reversed power connection,
however, reversing the 16-pin header may
cause serious damage to other components
of your system because it will short-circuit the
+12V and +5V power rails. The module should
be fastened by mounting the supplied screws
before powering up. To better understand the
device, we strongly advise the user to read
through the entire manual before using the
module.
MODULE OVERVIEW
Sarajewo features an audio delay line consist-
ing of three BBD chips of 4096 stages each (see
 
clock, and are connected in series so that the
2
module
explained

block diagram
LP filter
LP filter
tilt filter
expander
LP filter
expander expander
LP filter
bbd 1 bbd 2 bbd 3
crossfade
MIXED OUTPUT
T
1
T
2
T
3
compressor
INPUT
EXT FEEDBACK
LOOP