User manual
preset
management
(∞). The last value yields an oscillator-like be-
havior. Repeating is also possible for envelopes
is then disabled.
Whenever the repeat value is greater than 0,
the phase parameter will consider all the
repetitions as one long cycle when calculating
phase shift. Hence, the next envelope in a chain
may be activated anytime during the repeats
of the preceding one. note: the default value of
phase is zero. When a looped chain is selected
from the algorithms, at least one phase value
needs to be set to more than zero for the whole
loop to function properly.
Press the menu button two times to leave this
menu and cycle back to the main screen. Please
note that the activated functions are indicated
by the small chain, phase, and repeat labels
below the shape depiction.
menu: PReset mAnAGement
Zadar offers a myriad of parameters and set-
tings that can create quite complex program-
to save your work for later use within the de-
sired patching scenarios.
The red encoder
A
is used to navigate with-
in the preset
to select one of 18 preset slots. Then push the
knob again to bring up the selection of possible
operations: save, load, clear, and default
preset
will be required for each operation. Each preset
stores all the module settings. The default preset
is recalled on module power-up. Press the menu
button once to leave this menu and cycle back to
the main screen.
cOPYinG the settinGs
Press and hold the channel button
4
to open
the channel settings copy menu. It is possible to
paste the current channel settings to any other
channel or all at once. The red encoder
A
is
used to navigate within the copy menu. To leave
the menu without copying, select cancel.
QuicK sAVe
Zadar does not auto-save edited channel set-
tings. To quickly save them, press and hold the
menu button
6
by menu and channel
eXPAnDABilitY
Nin, an expander module also available from
Xaoc Devices, offers a second set of assignable
CV inputs and manual trigger/gate push-but-
chain algorithms
7