Operation Manual

24 25
• Thenextswitching time appears on
the display (example shows 6:00).
Usethesettingwheelto set the time.
• Conrm with OK.
• Then, select a temperature for the
selected switching time.
• Keep repeating this process until you have  nished sto-
ring temperatures for the period from 0:00 to 23:59.
• After all 7 switching times have been selected, 23:59 will
appear on the display as end time.
• Conrm with OK.
In Auto mode, the temperature can be modied at any time
via the setting wheel. The modi ed temperature will then
be retained until the next program changeover.
2. Weekly program: Examples
The energy-saving controller allows you to store up to 3 heat-
ing periods (7 switching times) with individual temperature
settings for each day of the week. The factory setting consists
of two heating phases (from 6:00 until 9:00 and from 17:00
until 23:00 respectively) for every single day of the week:
From 00:00 to 06:00 17.0°C
From 06:00 to 09:00 21.0°C
From 09:00 to 17:00 17.0°C
From 17:00 to 23:00 21.0°C
From 23:00 to 23:59 17.0°C
To represent the switching periods, the display shows
bars for every other switching interval. In this exam-
ple, no bars are shown for the interval from 0:00 to
6:00. Bars are only shown on the display for the in-
tervals from 6:00 to 9:00 and from 17:00 to 23:00.
If a room also needs to be heated at around noon, the cor-
responding program might look like this:
Monday to Sunday
From 00:00 to 06:00 16.0°C
From 06:00 to 09:00 22.0°C
From 09:00 to 12:00 17.0°C
From 12:00 to 14:00 20.0°C
From 14:00 to 17:30 17.0°C
From 17:30 to 23:30 21.0°C
From 23:30 to 23:59 16.0°C
If you have a home of ce and only want it to be heated
during the day on working days, you can program the fol-
lowing times:
Monday to Friday
From 00:00 to 08:30 17.0°C
From 08:30 to 17:00 21.0°C
From 17:00 to 23:59 17.0°C
Saturday and Sunday
From 00:00 to 23:59 15.0°C
3. Operating modes
To switch between the 3 operating modes described below,
press the menu button briey (these operating modes can
only be selected following installation/Step 3):
• Holiday function (
): Set a temperature that is to be
maintained until a  xed point in time.
• Manu: Manualoperation – The temperature is set manu-
ally using the setting wheel.
• Auto: Weekly program – The temperature is controlled au-
tomatically in accordance with the stored weekly program.
4. Conguration menu
The conguration menu can be used to modify settings.
To access this menu, press and hold down the menu
button (for more than 3 seconds).