User manual

10
G Operating Instructions
Operating Instructions
Please read these operating instructions before
installing the energy-saving controller.Keep these
documents for futurereference and pass them on if
you give the device to someone else.
Extent of delivery
1. Wireless Radiator Controller /Timer
2.Set of operating instructions
3. Coupling ring
4. Adapters (Danfoss RA, Danfoss RAV, Danfoss RAVL)
Safety instructions
•The product is intended for indoor use only.
•The product is intended for private, non-
commercial use only.
•Protect the product from dirt, moistureand
overheating, and only use it in adry environment.
•Use the product for its intended purpose only.
•Donot drop the product and do not expose it to
any major shocks.
•Keep this product, as all electrical products, out of
the reach of children!
•Donot modify the product in any way.Doing so
voids the warranty.
•Donot open the device or continue to operate it if
it becomes damaged.
•Dispose of packaging material immediately
according to locally applicable regulations.
Warning
•Immediately remove and dispose of dead
batteries from the product.
•Only use batteries (or rechargeable batteries)
that match the specied type.
•When inserting batteries, note the correct
polarity (+ and -markings) and insert the
batteries accordingly.Failuretodosocould
result in the batteries leaking or exploding.
•Donot mix old and new batteries or batteries
of adifferent type or make
•Donot attempt to charge non-rechargeable
batteries, as they may explode.
•Keep batteries out of the reach of children.
•Donot short circuit the batteries/rechargeable
batteries and keep them away from uncoated
metal objects.
•Never open, damage or swallow batteries or
allow them to enter the environment. They
can contain toxic, environmentally unfriendly
heavy metals.
•Remove the batteries from products that are
not being used for an extended period (unless
these arebeing kept ready for an emergency).
Proper use
The Wireless Radiator Controller/Timer is a
programmable radiator controller that can be used
to regulate the temperatureinclosed rooms and
thereby reduce the consumption of heating energy.
Please use Wireless Radiator Controller/Timer only
for this purpose. Youcan program and control
Wireless Radiator Controller /Timer manually using
the control buttons or conveniently via Bluetooth.
Inserting/changing batteries
Remove the battery compartment cover by lifting the
cover at the indicated point (1) and then unhooking it (2).
(2)
(1)
Insert the batteries as shown (2x AA/Mignon).
Do not use rechargeable batteries. Make sure
the polarity is correct.
Setting the date and time
When you start up the device for the rst time, the
year ashes once the batteries areinserted. Youcan
now set the date and time.
Set the year using the setting wheel.
OK
conrm.
Setthe month using thesetting wheel.
OK
conrm.
Set theday using the setting wheel.
OK
conrm.
Set the hour using the setting wheel.
OK
conrm.
Set theminutes using the settingwheel.
OK
conrm.
–Done!