XAVi Technologies Corporation Tel: +886-2-2995-7953 Fax: +886-2-29957954 9F, No. 129, Hsing Te Road, Sanchung City, Taipei County 241, Taiwan Copyright © 2005, XAVi Technologies Corporation Information in this manual is subject to change without notice. No part of this manual may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying or scanning, for any purpose, without the written permission of XAVi Technologies Corporation.
CERTIFICATION NOTICE Federal Communications Commission Compliance Notices To ensure continued compliance, use only shielded interface cables when connecting to the computer or peripheral devices. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This device complies with 15 of the FCC Rules.
FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Table of Contents CERTIFICATION NOTICE ............................................. 3 Federal Communications Commission Compliance Notices .....3 Federal Communication Commission (FCC) Statement: ............3 INFORMATION TO USER ............................................. 6 Introduction ............................................................................................6 Package Contents................................................................................6 System Requirements .......
INFORMATION TO USER Introduction Congratulations on purchasing this 802.11g WLAN Adapter. The XW101M Adapter 54 Mbps data rate provides an equivalent Ethernet speed to access corporate networks or the Internet in a wireless environment. And also provides easy plug & play Installation program on any computer with interface. When installed, the XW101M Adapter is able to communicate with any 802.11g-compliant product, allowing you to work anywhere in the coverage area, enjoying its convenience and mobility.
How to Install XW101M: Phase I 1. -Install XW101M Driver Turn on the computer and insert the driver CD into the appropriate drive. The installation & driver CD will automatically activate the Auto Run Installation program after you insert the disk into your CD drive. Do not insert your WLAN Adapter into the have finished the software installation. 2. The install will automatically appear. 3. Click Next to continue.
4. Click Next to install at the designated folder. Or, click “Browse” to select different folder. 5. Start copying files until it finish the installation.
6. Click Finish to complete installation. If the AutoRun function on your computer does not automatically start, the select your CD-ROM driver and double-click the file, SETUP.EXE under the Windows directory.
Phase II -Install XW101M Hardware Winzard 1. Find the location of the slot on your desktop or laptop. And insert the 802.11g WLAN Adapter into the slot on your desktop or laptop. 2. After inserting the WLAN Adapter into your computer, Windows will automatically detect that new hardware has been installed. Depending on which operating system you are using, the steps and screens may differ slightly. Click “Next” to continue installing.
3. For searching a suitable driver automatically, check the item as shown below. 4. Select “CD-ROM drivers” for looking for suitable drivers for XW101M.
5. Press the “Finish” button to finish to finish the package installation. After finishing the phase 1 installation of the driver, the NoteBooK (or PC) with WinME OS shall be restarted, but Win2000 or WinXP OS doesn’t need to be restarted.
Troubleshooting This chapter covers potential problems you may run into and the possible remedies. After each problem description, some instructions are provided to help you to diagnose and solve the problem. Q: When you encounter problems, there are some preliminary checklists that can help you to dig out the problems before you take further actions? A: - Try to isolate which part of the computer’s network connection is causing the problem. - Absence of, or conflict of the WLAN Card driver.
(Infrastructure mode) or with other wireless station(s) (Ad-Hoc mode). - Use the Site Survey utility of your Configuration & Monitor Utility to check if there is high interference around the environment. Q: When you cannot connect with Access Point? A: - Make sure that the Access Point that your WLAN Card is associated with is powered on and all the LEDs are working properly. - Reconfigure and reset the Access Point.