User's Manual

AR396 User’s Guide
4
Fro nt Pa ne l
The front panel of this device will be described here which cover all front panel definitions of
other models.
Figure 2: Front Panel and LEDs
Connector and LED definitions from left to right:
Label Color Function
Power Green or
Red
Off : No power
On (Green) : Power on
On (Red): Self-test fails
Alarm Red
On: DSL is not connected
LAN 1 ~ 4 Green
On : LAN link established and active
Off : No LAN link
Blink : Data being transmitted
WiFi Green
On : WLAN service is enabled
Off : WLAN service is disabled
Blink : Data being transmitted
DSL Green On : Physical layer sync up successfully.
Off : No connection or no signal
Blink : Physical sync up progress
Internet Green or
Red
Off : No connection to Internet
On (Green) : The device gets an IP address
successfully in router mode
Blink : Data being transmitted.
On (Red) : PPP Authenication of the device failed. Or
it can not get an IP address in ROUTER mode.