User's Manual

AR396 User’s Guide
10
Management: provides the administration utilities. It includes the sub menus, Settings,
System Log, SNMP Agent, TR-069 Client, Internet Time, Access Control, Update Software,
and Save/Reboot.
Te sting yo ur Se tup
Once you have connected your hardware and configured your PCs, any computer on your
LAN should be able to use the device to access the Internet.
To test the connection, turn on the device, wait seconds till device booting up and then verify
that the LEDs are illuminated as follows:
Table 1: LED Indicators
If the LEDs illuminate as expected, test your Internet connection from a LAN computer. To do
this, open your web browser, and type the URL of any external website (such as
http://www.yahoo.com).
If the LEDs do not illuminate as expected, you may need to configure your Internet access
settings using the information provided by your ISP. If the LEDs still do not illuminate as
expected or the web page is not displayed, see Troubleshooting section or contact your ISP
for assistance.
LED Behavior
Power
Solid red to indicate that the device is turned on. If
this light is not on, check the power cable
attachment.
Wireless (WiFi)
Solid green to indicate that the Wireless LAN
function is operational.
LAN
Solid green to indicate that the device can
communicate with your LAN.
DSL
Solid green to indicate that the device has
successfully established a connection with your ISP.