User's Manual

AR396 User’s Guide
16
Figure 16: WAN Port - ATM PVC Configuration
To configure ATM PVC on the WAN interface:
 Enter VPI/VCI values
 Check to enable the VLAN Mux that allows multiple protocols in the same PVC and then
enter the 802.11Q VLAN ID valued from 0 to 4095
 Select the Service Category from the list (UBR without PCR, UBR with PCR, CBR, Non
Realtime VBR, Realtime VBR). Please leave it as default, UBR with PCR, if ISP does not
give you any information of this setting.
 Check to enable the Qualify of Service if Service Category is UBR without PCR, URB with
PCR or Non Realtime VBR and you like this service. Select the Service Category from the
list (UBR without PCR, UBR with PCR, CBR, Non Realtime VBR, Realtime VBR). Please
leave it as default, if ISP does not give you any information of this setting.
Figure 17: Service Category Configuration
PCR stands for Peak Cell Rate (ATM cells per second). It is the maximum allowable rate
which cells can be transferred in the connection.
SCR stands for Sustainable Cell Rate (ATM cells per second). It is an average allowable
rate which cells can be transferred in the connection.
MRS stands for Maximum Burst Size (ATM cells). It is the maximum allowable burst size
of cells which cells can be transferred in the connection.